Setting The Hotel Option Data - Samsung 690 Installation Manual

To Enter: Press the → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
MUTE
To Exit from this menu : power off and turn on again.
✎
Depending on Model and Region, some menus do not exist on the TV set.
✎
Hotel factory menu is for Hotel option data setting only. Normal user operation should be strictly prohibited.
No
1 Hospitality Mode
2
Power
3
On
4 Channel
5 MyChannel
Menu
6
OSD
32
English

Setting the Hotel Option Data

Hotel TV Function
Category
SI Vendor
Power On Channel
EN
Power On Channel
Channel Type
Power On Volume
EN
Power On Volume
Min Volume
Max Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Mixed Channel
Map
Dynamic SI
Channel Rescan
Message
Mychannel En
Genre Editor
Picture Menu Lock
Menu Display
Channel Menu
Display
Description
initial value
Standalone Select the Hotel TV mode. (Standalone / Interactive)
OFF Select the SI Vendor
Set the default values, which will be applied when the TV is turned on.
– User Defined : Refers to the settings configured for Power On
Last Saved
Channel, Channel Type.
– Last Saved : Refers to the last saved settings.
1 TV will turn on to this particular Channel.
Provides channel Type description for Power On channel selected.
ATV
i.e.Selected channel analog or Digital & Antenna selection(Air or Cable).
Set the default volume values which will be applied when the TV is
turned on.
Last Saved
– User Defined : Uses the settings configured for Power On Volume.
– Last Saved : Uses the last saved settings.
10 TV will turn on with this Volume Level.
0 Minimum Volume Level setting user can set
100 Maximum Volume Level setting user can set
TV Select the Input source when TV is turned on initially.
Power On(AC Power On) Option
– Standby : Stand-By Mode
Last Option
– Power On : Power On
– Last Option : Last Power On State
User can set channel option.
Such as Auto Tunning, Manual Tunning, Antenna setting.
Provided option for editing Channel Name , Number and video.
Mute settings for channels in channel List.
Mix Air and Cable Channels (Only for Hong Kong and China model)
ON ON: Both of Air and Cable can watch and display in Channel Map
OFF: Through Channel Map only can select Air or Cable channel to watch
Off : No Check of the DTV Program channel information.
(DTV channel editor accessible, but addtional channel Program
OFF number auto update not supported)
On : Check the DTV Program channel information. (DTV channel
editor inaccessible)
This is a display option for the OSD text that appears when a user
configures the country specifications in hotel models. This option
determines whether to activate the items that are only executed
after a manual user confirmation when the notification message is
displayed while the country specifications are being configured.
ON
On - When TV has an event for setting change because of country
spec, It will be shown on the screen.
Off - Even TV has an event for setting change, because of country
spec, it will not be shown on the screen.
OFF Set the My channel function ON/OFF.
- User can set the genre for searched channel.
OFF Enable or disable the Picture Menu.
ON : Main Menu display
ON
OFF: Main Menu No display
ON: Channel menu display
OFF: Channel menu no display
OFF
(Only for Hong Kong and China model)