Advertisement
GS1200-5HP v2 / GS1200-8HP v2
5-Port / 8-Port Web Managed
PoE Gigabit Switch
Quick Start Guide
ČEŠTINA | SLOVENČINA | POLSKI | ROMÂNĂ
MAGYAR | SLOVENŠČINA | БЪЛГАРСКИ | TÜRK
繁體中文
ภาษาไทย |
Package Contents
Switch
Power Adapter
Power Cord
QSG
Declaration of Conformity
DoC
Safety Warning
1
Hardware Installation
2
POWER
ON
Back
DC 55V
1
Power Outlet
Front
PoE
3
4
OR
IP Phone
PoE IP Cam
Modem / Router
* Non-PoE devices can connect to the PoE ports, but PoE power
is not supplied to them.
SL
1
Priključite v ustrezno električno vtičnico.
Preklopite stikalo vkl./izk. na vklop ("ON").
2
Povežite vrata 1–4 PoE na naprave PoE (kot sta IP Cam in
3
telefon IP).
Povežite na modem ali usmerjevalnik, ki ima internetni
4
dostop.
Свържете към подходящо захранване.
BG
1
Натиснете превключвателя за захранване в положение
2
вкл.
Свържете PoE портове 1 - 4 към PoE устройства (като IP
3
КАМЕРА и IP телефон).
Свържете към модел или рутер, който има интернет
4
достъп.
TR
1
Uygun bir güç kaynağına bağlayın.
Güç anahtarını ON (AÇIK) konumuna ayarlayın.
2
PoE 1 - 4 bağlantı noktalarına PoE aygıtları (IP kamera ve
3
IP telefon gibi) bağlayın.
4
Internet erişimi olan bir modeme veya yönlendiriciye
bağlayın.
เชื ่ อ มต่ อ ไปยั ง แหล่ ง จ่ า ยไฟที ่ เ หมาะสม
TH
1
เปิ ด ปุ ่ ม พาวเวอร์ ไ ปที ่ ต ำแหน่ ง เปิ ด
2
เชื ่ อ มต่ อ พอร์ ต PoE 1-4 ไปที ่ อ ุ ป กรณ์ PoE (เช่ น กล้ อ ง IP Cam
3
และโทรศั พ ท์ IP)
4
เชื ่ อ มต่ อ กั บ โมเด็ ม หรื อ เราเตอร์ ท ี ่ ม ี ก ารเข้ า ถึ ง อิ น เทอร์ เ นต็
連接至適當的電源插座 。
TW
1
按下電源鍵以開啟交換器 。
2
將 PoE 埠 1-4 接上 PoE 受電設備(例如 ： 網路攝影機和網路電話) 。
3
連接至可存取網際網路的數據機或路由器 。
4
2
Manage Your Device
Switch IP:
192.168.1.3
5
PC IP:
192.168.1.4 ~ 192.168.1.254
6
Password : 1234
http://192.168.1.3
(default)
Log in
Password 1234
System Information
SIGN IN
SL
5
Z eternetnim kablom povežite računalnik na Switch.
Računalnik mora imeti naslov IP v istem podmrežju, kot
ga ima Switch.
6
Zaženite spletni brskalnik in odprite http://192.168.1.3.
Vnesite geslo 1234. Kliknite PRIJAVI.
Свържете Вашия компютър към суича с помощта на
BG
5
Ethernet кабел. Вашият компютър трябва да има IP адрес
в същата подмаска като суича.
Отворете браузъра и отидете на https://192.168.1.3.
6
Въведете 1234 като парола. Щракнете ВХОД.
TR
5
Bilgisayarınızı bir Ethernet kablosu kullanarak Anahtara
bağlayın. Bilgisayarınız, Anahtarla aynı alt ağdaki bir IP
adresine sahip olmalıdır.
6
Web tarayıcınızı başlatıp http://192.168.1.3 adresine gidin.
Şifre olarak 1234 girin. SIGN IN (OTURUM AÇ) düğmesine
tıklayın.
เชื ่ อ มต่ อ คอมพิ ว เตอร์ ก ั บ สวิ ท ช์ โ ดยใช้ ส ายเคเบิ ล อี เ ธอร์ เ น็ ต
TH
5
คอมพิ ว เตอร์ ข องคุ ณ ต้ อ งมี ท ี ่ อ ยู ่ IP ในเครื อ ข่ า ยย่ อ ยเช่ น เดี ย วกั บ สวิ ท ช
เปิ ด เว็ บ เบราว์ เ ซอร์ ข องคุ ณ และไปที ่ http://192.168.1.3 ป้ อ นรหั ส ผ่ า น
6
1234 คลิ ก SIGN IN (ลงชื ่ อ เข้ า ใช้ ง าน)์
用乙太網路線將電腦連接至交換器 。 您電腦的 IP 位址必須與交換
TW
5
器位在同一個子網域 。
啟動您的網頁瀏覽器 ， 並前往 http://192.168.1.3 。
6
輸入密碼 1234 並登入 。
LEDs
On - Power on
PWR/SYS
Green
Blinking - Starting up
On
- 10/100 Mbps
connection ready
Amber
Blinking - Data transmitting
LINK/ACT
On
- 1000 Mbps
connection ready
Green
Blinking - Data transmitting
On - PoE enabled
PoE
Green
Off - PoE disabled or not
supplied
On - More than 50W supplied
and approaching maximum
Amber
PoE MAX
Off - Less than 50W supplied
Troubleshooting
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
(The default IP address is 192.168.1.3.)
Make sure your computer is in the same subnet as the Switch. If you
haven't changed the default IP address, your computer IP address should
be in the 192.168.1.4 ~ 168.1.254 range.
Make sure you have entered the Password correctly. If you have changed
the Password and have forgotten it, you'll have to reset the Switch to its
factory default.
(The default Password is 1234.)
The PoE LED is off/PoE power is not supplied.
Make sure the Ethernet cable is securely connected to the Switch, and
you're using the correct type of Ethernet cable (Category 5e, 6UTP/STP, or
better Ethernet cable).
Go to System in the Web Configurator to check the amount of PoE power
available. The maximum PoE power is 60W, and the maximum per port is
30W. If the total power required by the PoE-enabled devices exceeds the
maximum PoE power, the last PoE-enabled device connected to the
Switch won't be powered up (PoE power is allocated in the order the
PoE-enabled devices were connected).
A loop is detected.
A loop may happen in the following example situations:
1. The Switch is connected to another device in a loop state.
2. The Switch is connected to another device with two cables.
Loop Prevention is enabled by default. If a loop happens, the Switch will
block the port in a loop state. If a loop happens on two ports, the Switch
will block the higher-numbered port. For example, if a loop happens on
ports 4 and 5, the Switch will block port 5, and its LED will be off. To restore
a port in a loop state, disconnect it, check the network connections, and
reconnect it.
You can log into the Web Configurator. Go to System in the Web
Configurator to check your port status.
Support Information
Bulgaria
support@zyxel.bg
Turkey
+ 90 212 444 11 50
bilgi@Zyxel.com.tr
Thailand
+ 66 2831 5315
support@zyxel.co.th
Taiwan
+ 886 2 2739 9889
retail@zyxel.com.tw
See the User's Guide at www.zyxel.com
for more information, including customer
support and safety warnings.
EU Importer
Zyxel Communications A/S
Generatorvej 8D, 2860 Søborg, Denmark.
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved.
Advertisement
