Back View - Control 4 AVM-HTC1-B Installation And User Manual

Back View

1
10
11
9
1. Power plug port — IEC C6 AC power receptacle for an IEC C5
power cord.
2. IR Out (6) — 3.5 mm jacks for up to 6 IR output transmitters.
3. Ethernet — RJ-45 jack for a 10/100 BaseT Ethernet connection.
4. Audio In (1 Left-Right pair) — RCA jacks for stereo channel input
(line level) for 1 stereo analog source.
5. Audio Out (2 Left-Right pairs) — RCA jacks for stereo channel
line output (line level) for amplifiers or audio switches.
6. Video Output — Composite RCA jack or S-VIDEO mini-DIN jack
for displaying navigation menus on a monitor or TV.
7. Video Sense In-Out (2 pairs) — Composite In-Out RCA jack pairs
for monitoring up to 2 video In sources, such as DVD players or
VCRs, that allow the system to determine the On/Off status of
devices. Each Out port allows the signal to pass through the Home
Theater Controller to provide a replacement port for the Video Out
port connected to the Home Theater Controller.
8. Video Sense In (2 singles) — Composite In RCA jacks for
monitoring up to 2 additional video In sources, such as DVD
players or VCRs, that allow the system to determine the On/Off
status of devices. These 2 ports do not have pass-through support.
9. Contact (1 set) — Screw-down pluggable terminal block
connector for 1 dry contact closure, logic input connection, door
contact sensor, or motion sensor.
2 3 4
12
13
5
6
7
8
9