Smtp Settings; Syslog Settings - 4IPNET WHG201 User Manual

17.5.1
Allows the configuration of 5 recipient E-mail addresses and necessary mail server settings where
various user related logs will be sent to.
SMTP Server: Enter the IP address of the sender's SMTP server.
SMTP Port: By default the port number is 25. Administrator can specify other ports if the SMTP server
runs SMTP over SSL.
Encryption: Enable this option if your SMTP server runs SMTP over TLS or SSL.
Authentication: The system provides four authentication methods, Plain, Login, CRAM-MD5 and
NTLMv1, or None to use none of the above. Depending on which authentication method is selected,
enter the Account Name, Password and Domain.
- Plain is standardized authentication mechanisms, using a UNIX login and password. Netscape
uses Plain.
- CRAM-MD5 is standardized authentication mechanisms. Pegasus uses CRAM-MD5 but which
method to be used cannot be configured.
- Login is Microsoft proprietary mechanisms, using a UNIX login and password. Outlook and
Outlook express use Login as default, although they can be set to use NTLMv1. Pegasus uses
Login as well but which method to be used cannot be configured.
- NTLMv1, a Microsoft proprietary mechanisms, is not currently available for general use.
Pegasus uses
Sender E-mail Address: The e-mail address of the administrator in charge of the monitoring. This will
show up as the sender's e-mail.
Receiver E-mail Address (1 ~ 5): Up to 5 E-mail addresses can be set up here to receive notifications.
Send Test E-mail: to send an email into the receivers' mailbox following above configuration when first
setup the SMTP server
Taking Gmail as SMTP server as example, the configurations are
- SMTP server address: smtp.gmail.com
- SMTP port: 465
- Encryption: SSL
- Authentication: Login: Account Name: admin's Gmail email address
- Authentication: Login: Password: admin's Gmail email's password
- Sender Email Address: admin's Gmail email address
17.5.2
Allows the configuration of two external SYSLOG servers where selected users logs as well as system
logs will be sent to.
SYSLOG Destinations: Up to two external SYSLOG servers may be configured. Please enter the IP
Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.

SMTP Settings

SYSLOG Settings

User Manual ENGLISH
WHG-Series Wireless WLAN Controller
146