Table of Contents
Advertisement
17-1111.fm Page 63 Wednesday, July 21, 1999 2:23 PM
6. Within 8 seconds, press
ory location number (01–50) where you want to store the
card sequence, or press
first unused memory location.
to prompt you for the next step.
Note: If you are unable to complete this step within 8
seconds, the display goes blank. Press
recall the display and try again.
7. Enter the name to describe this calling card sequence
(
XYZ LONG DIST
proceed without storing a name, simply press
phone displays the memory location number you
selected to confirm the entry.
Placing a Call Using a Stored Calling
Card Sequence
1. Recall the calling card sequence from memory, then
press
to dial the call. (Or, if you stored the sequence
SND
in any memory from 02–09, simply hold down that num-
ber for one-touch dialing.)
This prompts you to enter the area code and phone num-
ber you want to call.
2. Enter the area code and phone number you want to call,
or recall that number from memory, then press
phone begins dialing the call.
Note: When you press the keys, the phone sounds dif-
ferent tones than the ones it normally makes.
3. When you hear the prompt, press
card PIN (or other information you stored in the calling
card sequence).
Note: Repeat this step for each sequence you stored.
then enter the 2-digit mem-
STO
to automatically select the
Alpha or STO
, for example), then press
Enter Number
to dial the calling
SND
appears
to
END
STO
. To
STO
.The
STO
appears.
. The
SND
63
Advertisement
Table of Contents
