Missed Call Message - Radio Shack CT-502 Owner's Manual

17-1111.fm Page 17 Wednesday, July 21, 1999 2:23 PM
• To set your phone so you can answer a call by pressing
keys other than just
Answer" on Page 32.
• If you subscribe to calling line ID service through your
cellular carrier, you can view the calling party's phone
number on the phone's display. See "Viewing/Recalling
Messages" on Page 51.
• If your phone receives a call but the signal strength is too
weak to support it, Call
the phone sound a series of beeps (rather than ringing or
vibrating). The caller hears the standard "not in service"
message. If this happens, press
the display.

Missed Call Message

If your phone is on and receives a call, but you do not answer
it, Call appears on the display for about 15 seconds after
the calling party hangs up. The next time you press any key
(except , , or
END
CLR
seconds to notify you that you missed a call.
To clear Call from the display, press
, see "Using Multiple Key
SND
appears as usual, but you hear
to clear
CLR
), Call reappears for about 15
PWR
or
END
CLR
from
Call
.
17