Using The Menu Functions - Radio Shack CT-502 Owner's Manual

17-1111.fm Page 26 Wednesday, July 21, 1999 2:23 PM

USING THE MENU FUNCTIONS

Turning the Signal Strength Meter Off/On
Your phone is preset to display the signal strength meter
each time you turn on the phone, clear the display, or make a
call; however, you can set the phone so it does not display
the meter. Follow these steps to turn the signal strength
meter off or on.
1. Press . Signal Mtr On
NAME
FCN
MENU
2. Press so appears or
Off
CLR
3. Press to exit the functions menu. If you turned off
END
the signal strength meter,
instead of the signal strength meter.
Turning the Call-Time Reminder Tone Off/On
The call-time reminder function lets you set the phone to
sound a subtle tone 40 seconds after you place or answer a
call, then once every minute after that, to remind you of how
long you have been on the phone. Follow these steps to turn
the call-time reminder tone off or on.
1. Press .
NAME
FCN
MENU
2. Press once so
#
3. Press so On appears or
STO
4. Press to exit the functions menu.
END
26
or Off flashes
so appears.
On
STO
appears on the display
on
or
One Min Timr Off
so Off appears.
CLR
flashes.
On