Table of Contents
Advertisement
17-1111.fm Page 42 Wednesday, July 21, 1999 2:23 PM
CHANGING INFORMATION IN A
MEMORY LOCATION
1. Recall the memory location information.
2. Press
(if necessary) to display the phone number.
RCL
3. Repeatedly press
CLR
then enter the correct numbers; or, to simply add digits to
the existing number, enter the additional numbers. Then
press
and enter the two-digit memory number.
STO
Alpha or STO
appears to prompt you for the next step.
Note: If you enter an invalid location number (such as
51), the phone displays
the location prompt. Enter a valid location number.
Or, if you want to edit only the name, press
the two-digit memory location number, then skip to the
next step.
4. Repeatedly press
CLR
you want to change, then enter the correct character(s).
Or, to simply add characters to the existing name, enter
the additional characters.
Or, if you do not want to edit the name, skip to the next
step.
5. Press
. The selected memory number and
STO
appear briefly, then the phone number and
flash. Press
again to store the edited memory. The
STO
memory location number appears briefly to confirm the
entry.
42
to backspace and erase digits,
Invalid Locatn
followed by
STO
or
to erase each character
Change?
, enter
Full
Advertisement
Table of Contents
