Radio Shack CT-502 Owner's Manual page 30

17-1111.fm Page 30 Wednesday, July 21, 1999 2:23 PM
• If the call screening function is turned on, your phone
sounds a different alert tone or number of vibrations. See
"Using Call Screening" on Page 34.
Follow these steps to change the alert type.
1. Press .
NAME
FCN
MENU
2. Repeatedly press
Sel flashes, then press
The current setting (such as
3. Repeatedly press
you want to use, then press
4. Press to exit the functions menu.
END
Using the Quick-Set Method — To quickly set your phone
to ring or vibrate to alert you of an incoming call, press
. The phone displays
8
TUV
(for vibration alert).
Vibrate Only
Note: Using the quick-set method to set your phone to ring
( Ring Only ) automatically disables the silent alert if it is set.
Turning the Keypad Tones Off/On
Your phone is preset to sound a tone each time you press a
key; however, you can turn off the keypad tones. Follow
these steps to turn the keypad tones off or on.
1. Press .
NAME
FCN
MENU
2. Repeatedly press
or flashes.
Off
30
or until
# Ring Or Vib
to enter the change mode.
STO
Ring Only ) appears.
or # until you see the setting
to select that setting.
STO
Ring Only (for ring as usual) or
or until Keypad Tone On
#
FCN