Maintenance; Service And Repairs; Dismantling And Scrapping - Beijer Electronics EPC TA100 AM Service Maintenance Manual

2.2

Maintenance

Carefully read the instructions before beginning maintenance on the Panel PC.
Only qualified personnel should carry out maintenance.
•
The agreed warranty and license agreements apply.
•
Any damage to the Panel PC caused by personnel invalidates the warranty.
•
Before carrying out any cleaning or maintenance operations, disconnect the
•
Panel PC from the power supply.
Clean the display and surrounding front cover with a soft cloth and mild
•
detergent. Recommended cleaning fluids for the display are water and IPA
(Isopropyl Alcohol or Hexane).
Replacing the battery incorrectly may result in explosion. Only use batteries
•
recommended by the supplier.
A 6-month warranty on all service parts is provided.
•
Maintenance personnel are permitted to carry out the following actions:
Replacing the Rear Cover
•
Replacing the Display/Display Cable
•
Replacing the Complete Front
•
Replacing the Backlight
•
2.3

Service and Repairs

Only accredited companies are permitted to perform service and repairs.
•
If a non-accredited company conducts any kind of service or repair, the agreed
•
warranty will be invalidated.
If training is required, contact the supplier.
•
All maintenance should be performed in a 15-30 °C temperature range.
•
Any damage to the Panel PC caused by personnel invalidates the warranty.
•
Contracts with customers supersede the information in this document.
•
2.4

Dismantling and Scrapping

The Panel PC, or parts thereof, shall be recycled according to local
•
regulations.
The following components contain substances that might be hazardous to
•
health and the environment: lithium battery, electrolytic capacitor, display.
Beijer Electronics, MAEN043
Introduction
8