Table of Contents
Advertisement
Assembling
4.1 Installation and removal of media modules
Installing a media module
The media module is inserted with the handle pulled out. When the handle is inserted, the
media module is locked in the device.
Note
The figures in the following installation instructions show the installation of a media module in
a rack device. The procedure for installation is identical for rack or compact devices.
1.
Select the required slot on the device (for example,
X308-2M). Remove the dummy cover.
2.
Pull out the handle on the selected media module.
3.
Place the media module in the guide rails of the device
slot.
The media module is correctly installed when it clips
easily into the device.
28
Compact Operating Instructions, 05/2016, A5E02630805-12
SCALANCE MM900
Advertisement
Table of Contents
