Siemens SCALANCE MM900 Compact Operating Instructions
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Switch
  5. SCALANCE MM900
  6. Compact operating instructions
Siemens SCALANCE MM900 Compact Operating Instructions

Siemens SCALANCE MM900 Compact Operating Instructions

Industrial ethernet switches
Hide thumbs Also See for SCALANCE MM900:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Compact Operating Instructions
SCALANCE MM900
SIMATIC NET
Industrial Ethernet switches
SCALANCE MM900
Compact Operating Instructions
05/2016
A5E02630805-12
___________________
Introduction
Safety notes
___________________
Description
___________________
Assembling
___________________
Technical data
Approvals
___________________
Appendix
1
2
3
4
5
6
A

Advertisement

Table of Contents
loading

Related Manuals for Siemens SCALANCE MM900

Summary of Contents for Siemens SCALANCE MM900

  • Page 1 ___________________ SCALANCE MM900 Introduction Safety notes ___________________ SIMATIC NET Description ___________________ Assembling Industrial Ethernet switches SCALANCE MM900 ___________________ Technical data Approvals Compact Operating Instructions ___________________ Appendix 05/2016 A5E02630805-12...

  • Page 2: Legal Information

    Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Table Of Contents

    Introduction to MM900 ......................5 MM900 media modules......................6 Safety notes ............................9 General safety notices for the SCALANCE MM900 media modules ........9 Important notes on using the device in hazardous areas ............10 Description ............................13 Unpacking and checking ......................13 Components shipped with the MM900 product ..............
  • Page 4 MM900 declaration of conformity ................... 52 MM900 FDA and IEC approvals .................... 52 Appendix .............................. 55 EMC-compatible installation of electrical Industrial Ethernet or PROFIBUS cabling .... 55 Equipotential bonding ......................55 Index ..............................59 SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 5: Introduction

    Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept.

  • Page 6: Mm900 Media Modules

    To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. SIMATIC NET glossary Explanations of many of the specialist terms used in this documentation can be found in the SIMATIC NET glossary.
  • Page 7 2 x 1000 Mbps, SC ports optical, for glass FO cable (single mode), up 6GK5 992-2AP00-8AA0 to max. 70 km 9922AP MM992-2ELH 2 x 1000 Mbps, SC ports optical, for glass FO cable (single mode), up 6GK5 992-2AQ00-8AA0 to max. 120 km 9922AQ SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 8 SC port 1000 Mbps single mode FO cable (up to max. 40 km) SC port 1000 Mbps single mode FO cable (up to max. 70 km) SC port 1000 Mbps single mode FO cable (up to max. 120 km) SFP media module SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 9: Safety Notes

    Safety notes General safety notices for the SCALANCE MM900 media modules Safety notices on the use of the device The following safety notices must be adhered to when setting up and operating the device and during all associated work such as installation, connecting up, replacing or opening the device.

  • Page 10: Important Notes On Using The Device In Hazardous Areas

    To comply with EC Directive 94/9 (ATEX95) or the conditions of IECEx, this enclosure must meet the requirements of at least IP54 in compliance with EN 60529. The fiber-optic bus connections labeled SCALANCE MM900 (see type plate) may also be led through a hazardous area zone1 (see also Approvals (Page 47), section "Explosion Protection Directive (ATEX)").
  • Page 11 Safety notes 2.2 Important notes on using the device in hazardous areas WARNING Restricted area of application This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 12: Compact Operating Instructions, 05/2016, A5E02630805

    Safety notes 2.2 Important notes on using the device in hazardous areas SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 13: Description

    1. Make sure that the package is complete. 2. Check all the parts for transport damage. Components shipped with the MM900 product The following components are supplied with a SCALANCE MM900 media module: ● MM99x-2xx media module Note Identification labels The location labels identify the media modules and ship with the SCALANCE device.

  • Page 14: General Notes On Mm900

    MM900 media module. Possible attachment Figure Electrical RJ-45 ports with securing collar Electrical RJ-45 ports without securing collar GE M12 connector electrical BFOC ports optical Optical SC ports SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 15: Product Characteristics

    ● 2 x 10/100/1000 Mbps, RJ-45 ports electrical with securing collar Image 3-1 MM992-2CUC [9922GA] [Device labeling in square brackets] Note For connection to electrical networks note the information in Appendix A.1 and A.2. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 16: Mm992-2Cu Product Characteristics

    ● 2 x 10/100/1000 Mbps, GE M12 connector electrical Image 3-3 MM992-2M12C [9922HA] [Device labeling in square brackets] Note For connection to electrical networks note the information in Appendix (A.1, A.2 and A.3) SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 17: Mm992-2Vd Product Characteristics

    If you use a PROFIBUS standard cable GP, the wires must be stripped before they are inserted in the FC connector. Note If you use cables with a length > 500 m, connection establishment can take up to 2 min. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 18: Mm992-2Sfp / Mm992-2Sfp (C) Product Properties

    Possible attachments The MM991-2 media module has the following: ● 2 x 100 Mbps, BFOC port optical (multimode, glass) up to max. 5 km Image 3-6 MM991-2 [9912AB] [Device labeling in square brackets] SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 19: Mm991-2Fm Product Characteristics

    Possible attachments The MM991-2LD media module has the following: ● 2 x 100 Mbps, BFOC port optical, (single mode glass), up to max. 26 km Image 3-8 MM991-2LD [9912AC] [Device labeling in square brackets] SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 20: Mm991-2 (Sc) Product Characteristics

    The MM991-2LD (SC) media module has the following: ● 2 x 100 Mbps, SC port optical, (single mode glass), up to max. 26 km Image 3-10 MM991-2LD (SC) [9912AF] [Device labeling in square brackets] SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 21: Mm991-2Lh+ (Sc) Product Characteristics

    ● 2 x 100 Mbps SC RJ ports optical for Plastic Optical Fiber (POF) up to max. 50 m or Polymer Cladded Fiber (PCF) up to max. 100 m Image 3-12 MM991-2P [9912AH] SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 22: Mm992-2 Product Characteristics

    Possible attachments The MM992-2 media module has the following: ● 2 x 1000 Mbps, SC port optical, (multimode glass), up to max. 750 m Image 3-13 MM992-2 [9922AL] [Device labeling in square brackets] SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 23: Mm992-2Ld Product Characteristics

    Possible attachments The MM992-2LH media module has the following: ● 2 x 1000 Mbps, SC port optical, (single mode glass), up to max. 40 km Image 3-15 MM992-2LH [9922AN] [Device labeling in square brackets] SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 24: Mm992-2Lh+ Product Characteristics

    Possible attachments The MM992-2ELH media module has the following: ● 2 x 1000 Mbps, SC port optical, (single mode glass), up to max. 120 km Image 3-17 MM992-2ELH [9922AQ] [Device labeling in square brackets] SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 25: Assembling

    Media modules may only be inserted in or removed from a SCALANCE device when the power supply to the device has been turned off. Use only approved media modules Use only "MM900" media modules in the module slots of SCALANCE devices. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 26 Close unused optical sockets and plugs as well as pluggable transceivers and slots with the supplied protective caps. Remove the protective caps only immediately before you use the plug-in connection. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 27 4.1 Installation and removal of media modules NOTICE Use only approved SFPs If you use components not approved by Siemens AG, in particular SFPs, Siemens cannot accept any responsibility for the correct functioning of the "Ethernet switch system" according to the specification.
  • Page 28 Pull out the handle on the selected media module. Place the media module in the guide rails of the device slot. The media module is correctly installed when it clips easily into the device. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 29 1. Remove all connectors from the media module. 2. Pull out the handle of the media module and remove the media module from the device slot. 3. Secure the dummy cover. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 30: Sfp Installation In Sfp Media Module

    NOTICE Use only approved SFPs If you use SFPs that are not approved by Siemens AG, there is no guarantee that the device will function according to the specification. If you use unapproved SFPs, this can lead to the following problems: •...

  • Page 31: Removing An Sfp

    2. Open the clip on the SFP and remove the SFP from the SFP media module. Notice: It must be possible to remove the SFP easy without using force. 3. Fit a blind plug to the SFP. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 32 Assembling 4.2 SFP installation in SFP media module SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 33: Technical Data

    -40 °C to +50 °C X-300M Horizontal -40 °C to +60 °C -40 °C to +50 °C -40 °C to +60 °C -40 °C to +50 °C Vertical -40 °C to +45 °C SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 34 The permitted operating temperature depends on how the mounting device was installed. The installation is horizontal if the device labeling is from left to right. With a vertical installation, the device labeling is rotated through 90°. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 35: Connectors And Electrical Data

    2 x 100 Mbps, SC ports optical, single mode FO cable, up to max. 26 km MM991-2LH+ (SC) 2 x 100 Mbps, SC ports optical, single mode FO cable, up to max. 70 km SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 36 3.36 W MM992-2 70 mA 1.76 W MM992-2 (C) 70 mA 1.76 W MM992-2LD 80 mA 1.95 W MM992-2LH 90 mA 2.11 W MM992-2LH+ 100 mA 2.42 W MM992-2ELH 110 mA 2.75 W SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 37 Sensitivity min. [dBm] Input power max. [dBm] MM992-2CUC MM992-2CUC (C) MM992-2CU MM992-2M12 (C) MM992-2VD MM991-2 MM991-2FM MM991-2LD MM991-2 (SC) MM991-2LD (SC) MM991-2LH+ (SC) MM991-2P MM992-2 -9.5 MM992-2 (C) -9.5 MM992-2LD -9.5 MM992-2LH MM992-2LH+ MM992-2ELH MM992-2SFP SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 38: Cable Lengths

    PROFIBUS FC standard cable GP 0 to 100 m at 100 Mbps. with IE FC RJ-45 plug 4x2 The VD mode (Variable Distance) is turned off. The VD mode (Variable Distance) is turned on. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 39 3 dB link power margin MM991-2LD 9/125 µm 26 km ≤0.5 dB/km at 1310 nm; maximum insertion loss 0.5 dB; 14 (SC) single mode fiber dB max. permitted FO cable attenuation at 2 dB link power margin SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 40 If you establish a connection between such transceivers with a short cable length, use attenuators. Attenuators increase the attenuation and therefore protect the receiving diode. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 41: Other Properties

    MM991-2P > 230 years MM992-2VD > 200 years MM991-2, > 140 years MM991-2 (SC) MM991-2FM > 135 years MM992-2 (C) MM991-2LD, > 115 years MM991-2LD (SC), MM992-2LD MM991-2LH+, > 105 years MM992-2LH. MM992-2LH+ SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 42: Mm900 Dimension Drawings

    You will find further information in the compact operating instructions "Transceiver SFP/SFP+". empty MM900 dimension drawings Note The following dimension drawings are available for the MM900 product group. Image 5-1 MM900 dimension drawing 1: Electrical RJ-45 ports with securing collar SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 43 Technical data 5.5 MM900 dimension drawings Image 5-2 MM900 dimension drawing 2: Electrical RJ-45 ports without securing collar Image 5-3 MM900 dimension drawing 3: BFOC ports SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 44 Technical data 5.5 MM900 dimension drawings Image 5-4 MM900 dimension drawing 4: Optical SC ports Image 5-5 MM900 dimension drawing 5: SFP media module SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 45 Technical data 5.5 MM900 dimension drawings Image 5-6 MM900 dimension drawing 6: M12 ports electrical Image 5-7 MM900 dimension drawing 7: SC RJ ports optical SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 46 Technical data 5.5 MM900 dimension drawings SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 47: Approvals

    The installation of expansions that are not approved for SIMATIC NET products or their target systems may violate the requirements and regulations for safety and electromagnetic compatibility. Only use expansions that are approved for the system. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 48 (http://support.automation.siemens.com/WW/view/en/27069465)", in "Further documentation". – "EMC Installation Guidelines" configuration manual ID = 60612658 (http://support.automation.siemens.com/WW/view/en/60612658) ● Working on the device To protect the device from electrostatic discharge, personnel must first discharge any electrostatic charge from their body before touching the device.

  • Page 49: Atex (Kema 07 Atex0145 X)

    Area". You will find this document • on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support (http://support.automation.siemens.com/WW/view/en). Enter the document identification number C234 as the search term. SIMATIC NET products meet the requirements of the EC directive:94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
  • Page 50 ● FM Hazardous (Classified) Location Electrical Equipment: Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and Non Incendive / Class I / Zone 2 / Group IIC / T4 SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 51 Railway approval The following media modules meets the requirements of the Railway standard EN 50155:2007 "Railway Applications - Electronic equipment used on rolling stock". ● MM992-2 (C) ● MM992-2CUC (C) ● MM992-2 M12 (C) SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 52: Mm900 Declaration Of Conformity

    CLASS 1 LASER Product MM992-2LD CLASS 1 LASER Product MM992-2LH CLASS 1 LASER Product MM992-2LH+ CLASS 1 LASER Product MM992-2ELH CLASS 1 LASER Product You will find further information in the compact operating instructions "Transceiver SFP/SFP+". SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 53 Approvals 6.3 MM900 FDA and IEC approvals Image 6-1 FDA and IEC approvals SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 54 Approvals 6.3 MM900 FDA and IEC approvals SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 55: Appendix

    ● Cable shields are contacted at both ends and grounded to different parts of the plant. How do you avoid potential differences? Potential differences must be reduced by installing bonding conductors so that the functions of the electronic components used are guaranteed. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 56 Notes on systems in which no equipotential bonding is possible To ensure greater immunity to interference, cables for SIMATIC NET PROFINET and PROFIBUS are always shielded. Due to the defined shielding property, the shield needs to make contact at both ends. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 57 Despite this, to be able to use the shield properties of the cable note the following: ● Contact the shield at one end with low resistance. ● Connect the other end of the shield to the grounding system using capacitive coupling. SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 58 Appendix A.2 Equipotential bonding SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

  • Page 59: Index

    Index ATEX, 10 Attenuation, 40 Attenuator, 40 GI-PCF, 41 Glossary, 6 Hazardous area, 9 IECEx, 10 Safety notices, 9 SIMATIC NET glossary, 6 System manual, 48 SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...
  • Page 60 Index SCALANCE MM900 Compact Operating Instructions, 05/2016, A5E02630805-12...

This manual is also suitable for:

Simatic net

Table of Contents