V, Getting Started; 8650 Li-Ion Battery; Turning On The Shining - Zhiyun shining User Manual

Getting Started
1 8650 Li-ion Battery
Zhiyun 18650 Li-ion battery was specially
designed for the Shining. Before you start
using your Shinning, be sure to charge the
battery with Zhiyun approved charger. When
the 18650 Li-ion batteries are fully charged,
the Shining has a maximum run-time of six
hours. (When installing the batteries, please
note the cathode and anode.)
Power Protection
Shining Uaer llanual
Over-Discharge Discharging stops automatically when the battery voltage
Protection reaches 3.0V, preventing over-discharge damage
Short-Circuit
Automatically cuts power supply when a short circuit is
Protection
detected
Zhiyun 18650 Li-ion Battery Specifications
Type
Li-ion
Capacity
2000mAh
Charging Environment Temperature
o·
c-40' c
Operating Environment Temperature -10-40' c
Charging/Discharging Environment Relative
<8096
Humidity
o
Note: be sure that every battery is fully charged in the right way, any battery voltage lower
than 3.0V cannot run the gimbal.
o
Always use Zhiyun approved chargers. Zhiyun takes no responsibility for any consequences
resulting from the use of non-Zhiyun approved chargers.
Turning on the Shinning
Press the Power button, Shining enters
standby mode. After about seven seconds,
Shining starts to work. The default mode is
Following Mode.