How To Use The Control Button; How To Input Characters - Sony DCR-IP7BT Operating Instructions Manual

Basic operations in the NETWORK mode

How to use the control button

Most of the network operations are carried out by the control button. Select a button on
the screen using the control button, then enter it by pressing the control button.
Note
The shape of the control button differs depending on your camcorder model.
(1) Press v/V/b/B on the control button repeatedly to select the desired button
(2) Press the center z on the control button to enter it.
The procedure above is referred to as "Select [XXXX], then execute it" in this
network function operating instructions.

How to input characters

You have to frequently enter characters, such as e-mail addresses, Web page addresses
(URL) to use the network function. This section describes how to input characters.
1 Selecting the character type
(1) Display the character input screen.
10
displayed on the screen.
The selected button turns orange.
<illustration>
<illustration>
Repeat steps 1 and 2 to execute the function.
<illustration>