Inputting Characters - Sony DCR-IP7BT Operating Instructions Manual

Basic operations in NETWORK
(2) Select either of the character type tab.
ROMAN: When inputting alphabetical characters.
123: When inputting numerical characters.
When selecting ROMAN
<illustration>

2 Inputting characters

(1) Select the key which has the character you want to input.
<illustration>
(2) Press the center z on the control button to enter it.
Pressing it repeatedly selects the other characters on the key. When inputting
the same character or the other characters on the same key, select another key
using v/V/b/B on the control button, then select the previous key again. For
details on available characters, see the "The characters list" on page XX.
<illustration>
(3) Repeat steps 1 and 2 to input characters.
(4) After you input the characters, select [Enter], then execute it.
The screen which is displayed before you display the character input screen
appears.
Note
Even if you cancel inputting characters, select [Enter], then execute it to exit the
character input screen.
To delete the character
Select [<] or [,]. Each time you press the center z on the control button, the cursor is
moved to the left or right. Move the cursor at the right of the character you want to
delete, select [Back Space], then execute it. The character at the left of the cursor is
deleted.
When selecting 123
<illustration>
11