Setting Other Preferences - Sony DCR-IP7BT Operating Instructions Manual

Setting network preferences
(5) Select the Browse tab.
(6) Set up the following items:
(7) Select [Exit], then execute it.
(8) Select [Exit], then execute it.

4 Setting other preferences

(1) Display the Setup screen.
36
SMTP Server: Enter the SMTP (Simple Mail Transfer Protocol) server address
of your provider. The SMTP server is for sending e-mail.
Tip on "SMTP Server"
This "SMTP Server" is also referred to as a "mail server," "SMTP mail server,"
etc. The SMTP server is the same as the POP server depending on the provider.
POP Server: Enter the POP (Post Office Protocol) server address of your
provider. The POP server is for receiving e-mail.
Tip on "POP Server"
This "POP Server" is also referred to as a "mail server," "POP3 server," etc.
APOP: Select whether you use APOP.
Tip on "APOP"
APOP is the authentication protocol for security. When your provider supports
APOP, we recommend that you check this item. For more information on
whether the provider support APOP or not, consult your provider.
The Browse screen appears.
<illustration>
Proxy: Enter the proxy server address of your provider.
Port: Enter the port number of the proxy server of your provider. This entry
may be unnecessary depending on your provider. For details, consult your
provider.
The setup is completed, and the Network Setup screen appears again.
The Setup screen appears again.
<illustration>