Sony DCR-IP7BT Operating Instructions Manual page 20

Registering a Bluetooth device
(10) Select [Exit], then execute it.
When the registration was failed
Carry out the procedure "When using the Modem Adaptor with Bluetooth Function "
on page xx again from step 4.
Displaying self information
You can display your camcorder information.
(1) Open the Network Menu.
(2) Select [
(3) Select [Bluetooth Setup], then execute it.
(4) Select [Self information], then execute it.
20
The Network Menu appears again.
For details on how to open the Network Menu, refer to the section "Accessing
to the network" in the operating instructions supplied with your camcorder.
<illustration>
Setup], then execute it.
The Setup screen appears.
<illustration>
The Bluetooth Setup screen appears.
<illustration>
The Bluetooth: Self information screen appears.
<illustration>
The model name
This is the unique address equipped
with each camcorder at the factory. This
is used when exchanging information
between the devices. This cannot be
modified.