Music On Hold - NEC SL2100 Quick Install Manual

Configure the SL2100

Music on Hold

There are several options available:

Internal music tune

Internal service tone (this is the PCPro wizard default setting)

Internal VRS message

Connect an external music device (External MOH)
Within the Chassis View click the MOH interface.
The Properties pane will show the source selection.
The Properties pane will then show the configuration options for each of the selections:
Internal music tone – Tone Selection = pre-recorded tune 1
External music device – External MOH slot = Universal slots 1~12, select the slot that has the IP7WW-082U-
B1 or IP7WW-308U-A1 card installed that you want to use for External MOH input.
Internal service tone – Uses Service tone 64 (beep-beep comfort tone)
VRS Message – Tone Selection = VRS message 001~100 which can be a recorded announcement by a user
(Refer to the Multi-Line Telephone User Guide for instructions to record the VRS message).
Note – the VRS selection has further options available (eg upload of professionally recorded announcements).
Quick Install Guide – SL2100 MOH and External Audio rev 1.1
Select the MOH
source
Select the MOH
interface
17