Procedure 3-1: Changing The Built-In Password - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall

Procedure 3-1: Changing the Built-In Password

Log in to the firewall at its default LAN address of http://192.168.0.1 with its default User
1.
Name of , default password of
admin
LAN address you have chosen for the firewall.
From the Main Menu of the browser interface, under the Maintenance heading, select Set
2.
Password to bring up the menu shown in
To change the password, first enter the old password, and then enter the new password twice.
3.
Click Apply to save your changes.
4.
Note: After changing the password, you will be required to log in again to continue the
If you have backed up the firewall settings previously, you should do a new
configuration.
backup so that the saved settings file includes the new password.
3-2
, or using whatever User Name, Password and
password
Figure 3-1: Log in to the firewall
Figure
Figure 3-2: Set Password menu
3-2.
Protecting Your Network