NETGEAR FVM318 Reference Manual page 42

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Choose the type of Serial Port Usage:
c.
• Auto-rollover with a wait time in minutes
• Primary Internet connection
Fill in the ISP Internet configuration parameters as appropriate:
d.
• For a Dial-up Account, enter the Account/User Name, Password, the Telephone
number to dial, an Alternative Telephone number if available. Check "Connect as
required" to enable the firewall to automatically dial the number. If you want to enable
a Idle Time disconnect, check the box and enter a time in minutes.
• To configure the TCP/IP settings, fill in whatever address parameters your ISP
provided.
Configure the Modem parameters:
e.
• Select the Serial Line Speed.
This is the maximum speed the modem will attempt to use. For ISDN permanent
connections, the speeds are typically 64000 or 128000 bps. For dial-up modems, 56000
bps would be a typical setting.
—For ISDN, select "Permanent connection (leased line)."
—For dial-up, select your modem from the list.
—If your modem is not on the list, select "User Defined" and enter the Modem Properties.
Connecting the Firewall to the Internet
Figure 2-14: Modem configuration menu
2-19