Setting The Ip Address - LG PQCPM11A0 Installation And Owner's Manual

2. Installing Web PDI

Setting the IP address

In order for the user to use the functions of the Web PDI via the web, the unique IP address should be
given to the Web PDI. Set the IP address as follows:
1.
Press the 'MENU/SELECT' button of the Web PDI. [MENU] screen is displayed as shown at below.
Press the 'MENU/SELECT' button again. The screen to enter the IP address is displayed.
MENU/ MENU/
SELECT SELECT
2.
Use Up/Down/Left/Right (
MENU/ MENU/
SELECT SELECT
3.
After entering the IP address, press the 'MENU/SELECT' button to set the entered IP address. But,
there is no 'MENU/SELECT' button pressed for a specific period (about 5 seconds), it returns to the
initial screen with the entered IP address not applied to the system, and the existing set IP address
is used.
MENU/ MENU/
SELECT SELECT
2-12
Web PDI
Click Click
MENU MENU
/SELECT /SELECT
button button
) button to enter the desired IP address.
[MENU] ➞ [MENU] ➞
Set IP Address Set IP Address
[Set IP Address] [Set IP Address]
192.168.000.000 192.168.000.000
[Set IP Address] [Set IP Address]
192.168.002.101 192.168.002.101
Example to set IP address Example to set IP address
Web PDI Web PDI
SW ver. 1.0.0 SW ver. 1.0.0