Table of Contents
Advertisement
How to set the network address
The network address consists of four 3-digit numbers. In case of setting the network address, the
name of the related address is displayed on the LCD of the Web PDI. Press Up/Down/Left/Right ( ,
,
,
) button to set.
Press Up/Down ( ,
) button to increase/decrease the number of the digit where the cursor is
placed, and press Left/Right ( ,
When pressing the down( ) button
MENU/
SELECT
When pressing the right( ) button
MENU/
SELECT
Also, in order the sum of three numbers not to exceed 255, the first digit of each address is set only
when the second digit is set to less than or equal to 4. At the following example, '1' can not be
changed to '2.' In this case, it can be changed after '6', the next digit, is set to less than or equal to '4.'
[Set IP Address]
192.168.000.000
[Set IP Address]
192.148.000.000
) button to move the digit of the network address.
Cannot be set!!
Possible to set
after setting the
next digit to less
than or equal to 4.
Installation/Owner's Manual
2. Installing Web PDI
[Set IP Address]
192.168.000.000
[Set IP Address]
192.167.000.000
[Set IP Address]
192.168.000.000
[Set IP Address]
192.168.000.000
2-11
Advertisement
Table of Contents
