Table of Contents
Advertisement
2. Installing Web PDI
Entering into the environment setup mode
Press 'MENU/SELECT' button of the Web PDI to enter into the environment setup mode of the Web
PDI. When the 'MENU/SELECT' button is pressed for the first time, the menu to set the IP address is
displayed as shown below.
MENU/
SELECT
Select the desired function by pressing the left/right button ( ,
( ,
) is pressed, the menu is changed as shown below.
Enter the IP address
[MENU] ➞
Set IP Address
Offered later (not at present)
[MENU] ➞
Set Update Svr
Press the 'MENU/SELECT' button at the desired function to enter into the setup screen for the related
mode.
2-10
Web PDI
[MENU] ➞
Set IP Address
). Whenever the left/right button
Enter Gateway address
[MENU] ➞
Set GW Address
Enter Netmask
[MENU] ➞
Set Netmask
Advertisement
Table of Contents
