Makita DCL181F Instruction Manual

Cordless cleaner
Hide thumbs Also See for DCL181F:

Advertisement

INSTRUCTION MANUAL
Cordless Cleaner
DCL181F
Read before use.

Advertisement

Table of Contents
loading

Summary of Contents for Makita DCL181F

  • Page 1 INSTRUCTION MANUAL Cordless Cleaner DCL181F Read before use.
  • Page 2: Specifications

    Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. SPECIFICATIONS Model: DCL181F Capacity 650 mL Continuous use HIGH Approx. 20 min (with battery BL1830B) Approx.
  • Page 3 SAVE THESE INSTRUCTIONS. — Wet dirt, water, oil or the like CAUTION: Only use genuine Makita batteries. — Hard pieces with sharp edges, such as wood chips, metals, stones, glasses, have been altered, may result in the battery bursting nails, pins or razors —...
  • Page 4: Functional Description

    FUNCTIONAL CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, DESCRIPTION you or someone around you. CAUTION: Do not install the battery cartridge CAUTION: Always be sure that the tool is forcibly. If the cartridge does not slide in easily, it is switched off and the battery cartridge is removed not being inserted correctly.
  • Page 5 cate the remaining battery capacity. The indicator lamps light up for few seconds. Indicator lamps Remaining capacity Lighted Blinking 75% to 100% 50% to 75% 25% to 50% 1. OFF button 2. 3. Lamp 0% to 25% Charge the button. To turn off the lamp, press the "OFF" button. battery.
  • Page 6 Disposing of dust CAUTION: Empty the cleaner before it becomes too full, or the suction force weakens. CAUTION: Be sure to empty out the dust inside the cleaner itself. Failure to do so may damaged. capsule, tap the capsule 4 or 5 times with your hand. Now point suction inlet downwards, turn capsule in direction of arrow in diagram, and disconnect capsule slowly and straight.
  • Page 7 1. Capsule 2. 1. Filter NOTE: to unfasten securing lip from cleaner unit and then pull shown in diagram, dust will get into motor housing, and cause motor failure. unit. Reassembly unit. Connect capsule. Align O symbol on capsule with direction of arrow until it is secured.
  • Page 8 1. Filter state 1. Handle 2. Capsule NOTE: Always remove dust ahead of time, as suction 1. Filter power will be reduced if there is too much dust in cleaner. into groove of cleaner housing NOTE: If they are not loaded correctly, dust will get into the motor housing, and cause motor failure.
  • Page 9: Operation

    1. Handle 2. Capsule NOTE: Always remove dust ahead of time, as suction power will be reduced if there is too much dust in cleaner. NOTE: Always be sure to check that high perfor- If they are not loaded correctly, dust will get into the motor housing, and cause motor failure.
  • Page 10 Corner nozzle Fit on the corner nozzle for cleaning corners and crev- ices of a car or furniture. 1. Capsule Cleaning (Suction) 1. Corner nozzle 2. Cleaner body Nozzle Corner nozzle +Extension wand Attach the nozzle to clean off tables, desks, furniture, etc.
  • Page 11: Maintenance

    If you need any assistance for more details regard- OPTIONAL Center. ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool The use of any other accessories or attachments might present a risk of for its stated purpose. 11 ENGLISH...
  • Page 12 NOTE: tool package as standard accessories. They may differ from country to country. Jan-Baptist Vinkstraat 2, Makita Europe N.V. 3070 Kortenberg, Belgium 3-11-8, Sumiyoshi-cho, Makita Corporation Anjo, Aichi 446-8502 Japan 885580-221 www.makita.com 20161207...

Table of Contents