cate the remaining battery capacity. The indicator lamps
light up for few seconds.
Indicator lamps
Lighted
Off
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Switch action
2
1
1. OFF button 2.
button. To switch off, press the "OFF" button. To change
ond press for low speed and then each press on this
Lighting the lamp
CAUTION:
Never look into the light directly.
Direct light causes damage to your eyes.
-
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
-
1
1. OFF button 2.
button. To turn off the lamp, press the "OFF" button.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
1
1. Capsule 2.
1
1. Capsule 2.
5 ENGLISH
2
3
3. Lamp
2
3
3. Filter
2