Cembre LD-2EN Operation And Maintenance Manual page 7

3.4) Templates for positioning the drill on rails and stock rails
to enable drilling to be carried out according to the provisions of
railway boards standards:
e.g.:
– MPAF UIC54 on DRILLING AXIS of UIC 54 rail
– MPAF UIC60 on DRILLING AXIS of UIC 60 rail
•
Note: Contact Cembre for selection of specific application
accessories.
3.5) MPAU universal positioning template suitable both for repair-
ing existing holes on various fittings, and for drilling disused rails.
3.6) SPA positioning plates for drilling rail heads
with a centre-to-centre distance established
in the Railway boards standards, without the
need for marking out; for use in conjunction
with MPAF... positioning templates.
3.7) MRF clamp to be applied as a reference to the
head of rails for use, in conjunction with SPA...
positioning plates, for in-line drilling of rail heads,
with established centre-to-centre distance.
3.8) VAL MPA tool case suitable for storing
the accessories indicated in 3.5 - 3.8, and the
drilling tools.
7