Figure 108: Ethernet Cable Plugged Into the Eth0 Port
Plug the other end of the CAT5 cable in the audio adapter.
•
Take another CAT5 cable end and plug it into the bottom AES slot (RJ-45 connector)
•
faudio channels 9-16.
Plug the other end of the CAT5 cable in the audio processor.
•
Plug one CAT5 cable end from the GPI slot into which ever automator is available or
•
required.
Take another CAT5 cable and plug it from the GPO slot into which ever automator is
•
available or required.
Power on the NEC projector.
•
Note: The IMB board will boot up completely
Power on the ShowVault.
•
_____________________________________________________________________________________
SHV.OM.001293.DRM
Figure 109: Adapter
Page 105
Doremi Cinema LLC Confidential
Version 1.3