Standards And Approvals; Safety Approvals; Fcc Compliance Statement For United States Users - Epson LX–350 User Manual

Home > Product Information

Standards and Approvals

Safety approvals

CE marking

FCC compliance statement for United States users

For Canadian users
WARNING:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this device.
You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your
authority to operate the equipment.
Safety approvals
120 V model:
Safety standards
EMI
230 V model:
Safety standards
EMI
CE marking
230 V model:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
FCC compliance statement for United States users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required
UL60950-1
CAN/CSA C22.2 No.60950-1
FCC part 15 subpart B Class A
ICES-003 Class A
IEC/EN60950-1
AS/NZS CISPR22 class A
EN60950-1
EN55022 class A
EN61000-3-2
EN61000-3-3
EN55024
Top
Top