Epson LX–350 User Manual page 24

Note:
Your tear-off position setting remains in effect until you change it, even if you turn off the printer.
Make sure the Tear Off (Font) light is flashing (the paper is at the current tear-off position). You may need to press the
Tear Off (Font) button to advance the paper to the tear-off position.
Open the paper guide cover.
Hold down the Pause button for about three seconds. The Pause light begins to flash and the printer enters the Micro
Adjust mode.
Press the LF/FF button to feed the paper backwards, or press the Load/Eject
until the paper perforation is aligned with the tear-off edge.
* tear-off edge
Note:
When the paper reaches the default position, the printer beeps and stops moving the paper.
The printer has a minimum and a maximum tear-off position. If you try to adjust the tear-off position
beyond these limits, the printer beeps and stops moving the paper.
After you set the tear-off position, press the Pause button to exit the Micro Adjust mode.
Tear off the printed pages.
When you resume printing, the printer automatically feeds the paper back to the top-of-form position and begins printing.
button to feed the paper forwards,
Top