Epson LX–350 User Manual page 84

Input voltage range
Rated frequency range
Input frequency range
Rated current
Power consumption
* sleep mode: When 4 minutes and 30 seconds pass in the following condition, the printer enters sleep mode.
- No operation
- No error
- There is no data in input buffer
Note:
Check the label on the back of the printer for the voltage of your printer.
Environmental
Operation
Storage
Paper
Note:
Use recycled paper, envelopes, and single-sheet multipart forms only under normal temperature and
humidity conditions, as follows:
Temperature: 15 to 25 ˚C (59 to 77 ˚F)
Humidity: 30 to 60% RH
Do not load paper that has been folded or is damaged, wrinkled, or curled.
Single sheets (standard): paper guide entry
Width
Length
Thickness
Weight
Single-sheet multipart forms: paper guide entry
Width
Length
Copies
AC 99 to 132 V
50 to 60 Hz
49.5 to 60.5 Hz
0.8 A (maximum 1.5 A depending
on the character type)
Approx. 27 W (ISO/IEC 10561 letter pattern)
Approx. 10 W in standby mode
Approx. 1.1 W in sleep mode
Approx. 0.5 W in auto off mode
0 W in power off
Temperature
(without condensation)
5 to 35 ˚C (41 to 95 ˚F)
-30 to 60 ˚C (-22 to 140 ˚F)
100 to 257 mm (3.9 to 10.1 inches)
100 to 364 mm (3.9 to 14.3 inches)
0.065 to 0.14 mm (0.0025 to 0.0055 inch)
52 to 90 g/m² (14 to 24 lb)
100 to 257 mm (3.9 to 10.1 inches)
100 to 364 mm (3.9 to 14.3 inches)
1 original + up to 4 copies
AC 198 to 264 V
0.4 A (maximum 0.7 A depending
on the character type)
*
Humidity
(without condensation)
10 to 80% RH
0 to 85% RH
Top
Top