Operation; Power On/Off - Lippert Components OneControl Owner's Manual

operation

Power On/Off

1. To power ON the OneControl® tablet, hold and release the power button for 2-3 seconds (Fig. 1).
NoTe: It will take a few moments to start up and load the system.
2.
To enter or exit sleep mode, press and release the power button.
NoTe: When in sleep mode, the tablet will continue to draw small amounts of power. If the tablet is going
to be unused for an extended period of time, it is recommended that the tablet be powered "off."
3.
To power OFF the OneControl® tablet, press and hold the power button until a utility screen appears
(Fig. 3).
4.
Select "Power off" (Fig. 3A).
5.
Press "OK" (Fig. 4A) when confirmation box displays: "Your tablet will shut down."
NoTe: Do not complete the steps to "Factory Reset" your tablet in settings. This will erase all data on your
tablet and VOID the warranty on the tablet.
Microphone
Power Button
Headphone Jack
Micro USB
Volume Control
A
Rev: 12.11.2017
Fig. 1
TF/Micro SD
Fig. 3
Card Port
Reset
Page 3
Fig. 2
Fig. 4
A
OneControl Tablet Owner's Manual