Connecting The Onecontrol® Tablet To The Onecontrol® Wireless Network; Wireless Hub And Range Extender; Docking Station - Lippert Components OneControl Owner's Manual

Connecting the OneControl® Tablet to the OneControl® Wireless Network
1.
On the OneControl® home page, select "Apps & Internet."
2.
On the "Apps and Internet Browser," select the "WiFi Manager."
3. Locate the OneControl® Hub (Fig. 5) or Range Extender (Fig. 6) and the label which contains the SSID
and password to the OneControl® system.
4.
Match the SSID on the OneControl® Hub (Fig. 5A) or Range Extender (Fig. 6A) to the corresponding
SSID in the "Wifi Manager."
5.
Select the SSID and enter the password located on the OneControl® Hub (Fig. 5B) or Range Extender
(Fig. 6B)then press "Connect."

Wireless Hub and Range Extender

The OneControl® system is equipped with a wireless hub and range extender. When powered, the hub and range
extender provide the perimeter of the coach with wireless connectivity. This allows the tablet to effectively send
commands wirelessly to the OneControl® system. The hub and range extender's only purpose is to provide wireless
connectivity. The hub and range extender does not keep configuration data, so when troubleshooting wireless
connection concerns, ensure the tablet can operate the OneControl®Control Panel when housed in the docking
station. Again, as long as there is power to the coach, the OneControl® system should operate from the dock.

Docking Station

The OneControl® system includes a tablet docking station. This is typically mounted near the center of the coach,
and houses the tablet when the wireless operation is unnecessary or during travel. To connect the tablet to the
docking station, open the door on the docking station, and slide the tablet into the sleeve on the door about 3/4 of
the way in. Then connect the micro USB plug on the docking station into the micro USB port on the tablet. Slide the
tablet the rest of the way into the sleeve and then close the door. The docking station is wired to the coach power
system, which will charge the tablet during its storage period. The docking station is also wired for communication
with the various controllers in the coach. This allows the tablet to function when stored in the dock without being
reliant on the wireless hub.
Rev: 12.11.2017
A
A
B
Fig. 5
Fig. 6
Page 4
B
OneControl Tablet Owner's Manual