Passage Mode Enable/Disable - Schedule Will Not Override; Pass Time - Alarm Lock DL2800 Programming Instructions Manual

PASSAGE MODE

Passage Mode Enable/Disable - Schedule will not Override

• Allows passage through the door without the need for a code using Function 48. Re-
Lock using Function 49.
• Programmed Schedules will not override the state of the lock using functions 48 and 49.
If it is required that programmed schedules do override passage mode, Enable/Disable
Passage mode using Functions 45/46. Use Function 50 to return the lock to scheduled
functions.
48. Enable Passage Mode
49. Disable Passage Mode
50. Return Lock to Normal
Passage Mode Schedule
(The DL2800 will lock or unlock
depending on the current schedule)
See Scheduled functions 72 and 73 for scheduled passage mode.
NOTE:

PASS TIME

Pass Time
Use the functions below to change the pass time to 5, 10 or 15 seconds. The Pass Time
is defaulted to 5 seconds. The Pass Time is the time the lock stays unlocked after a User
Code is entered.
51. Set Pass Time to 5 Sec.
52. Set Pass Time to 10 Sec.
53. Set Pass Time to 15 Sec.
54. Reserved
; 4 8 :
; 4 9 :
; 5 0 :
; 5 1 :
; 5 2 :
; 5 3 :
2
4
17