Table of Contents
Advertisement
43-787.fm Page 8 Monday, August 16, 1999 8:11 AM
PREPARATION
SETTING THE DAY AND
TIME
Follow these steps to set the current day
and time so the TAD-1027 records the
correct day and time of the call with each
phone message.
Note: If you do not complete each step
within 8 seconds, the TAD-1027 sounds
a three-tone beep and stops setting the
day and time. Start again at Step 1.
1. Use a straightened paper clip to
hold down
CLOCK
1027
beeps.
The
announces, "Sunday."
Illus. showing CLOCK
switch.
Note: If necessary, adjust
2. To change the day of the week,
repeatedly press
move backward or
move
forward
announces the desired day of the
week.
8
until the TAD-
TAD
then
.
VOLUME
to
OGM/REPEAT
to
PLAY/SKIP
until
the
TAD
Illus. showing OGM/REPEAT
and PLAY/SKIP.
3. Press
ANSWER/STOP/DELETE
TAD-1027
beeps
announces the hour and "AM" or
"PM."
Illus. showing ANSWER/
STOP/DELETE.
4. To change the hour, repeatedly
press
OGM/REPEAT
ward or
PLAY/SKIP
to the desired hour.
5. Press
ANSWER/STOP/DELETE
TAD-1027 beeps once and an-
nounces the minutes.
6. To change the minutes, repeatedly
press
OGM/REPEAT
ward or
PLAY/SKIP
to the desired minute.
Note: You can hold down
or
REPEAT
PLAY/SKIP
minutes in 10-minute increments.
. The
once
and
to move back-
to move forward
. The
to move back-
to move forward
OGM/
to move the
Advertisement
Table of Contents
