Switching Between The Handset And Speakerphone; Using Both The Handset And Speakerphone; Using Flash - Radio Shack TAD -797 Owner's Manual

43-797.fm Page 18 Monday, August 16, 1999 9:20 AM
To adjust the speakerphone's volume,
repeatedly press
VOLUME
base. The volume setting from
est) to 10 (highest) appears in the mes-
sage counter window.
To end a speakerphone call, press
again.
SPEAKER
SWITCHING BETWEEN
THE HANDSET AND
SPEAKERPHONE
To switch to the speakerphone while
you are using the handset, press
on the base. When you hear
SPEAKER
the conversation or dial tone on the
speakerphone, press
TALK
set.
To switch to the handset while you are
using the speakerphone, simply lift the
handset off the base. If the handset is
away from the base, press
press .
SPEAKER
18
USING BOTH THE
s or t on the
HANDSET AND
(low-
1
SPEAKERPHONE
If someone else is using the speaker-
phone, press
join the conversation. If someone else is
using the handset, press
the base to join the conversation.
During the call, one person can hang up
and let the call continue at the other key-
pad. Or, both people can hang up to end
the call.
Note: If you hear a high-pitched noise
from the base's speaker, the handset
and the base are too close together.

USING FLASH

FLASH
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
on the hand-
, then
TALK
For example, if you have Call Waiting,
press
without disconnecting the current call.
Press
call.
Note: If you do not have any special
phone services, pressing
disconnect the current call.
on the handset to
TALK
SPEAKER
performs the electronic equiva-
to answer an incoming call
FLASH
again to return to the first
FLASH
FLASH
on
might