Radio Shack TAD-716 Operating Instructions

Remote operation

Hide thumbs Also See for TAD-716:

See also: Owner's Manual

TAD-716

REMOTE OPERATION

INSTRUCTIONS

Cat. No. 43-716

For detailed instructions, see the

owner's manual.

To set the TAD-716 to answer

calls, dial your phone number.

The TAD-716 answers after 12

or 14 rings. Hang up the phone.

To hear messages, dial your

phone number. When the beep

sounds after the TAD-716 plays

the outgoing message, enter the

remote operation security code.

Table of Contents

Need help?

Do you have a question about the TAD-716 and is the answer not in the manual?

Page 1 REMOTE OPERATION INSTRUCTIONS Cat. No. 43-716 For detailed instructions, see the owner’s manual. To set the TAD-716 to answer calls, dial your phone number. The TAD-716 answers after 12 or 14 rings. Hang up the phone. To hear messages, dial your phone number.
Page 2 At the end of all messages, a se- ries of beeps sounds. To replay messages, wait 5 seconds after the beeps. When you hear a single long beep, re- enter the remote operation secu- rity code. To erase messages after play- back, enter the remote operation security code within 5 seconds after the series of beeps.