Turning Caller Id/Call Waiting On Or Off; Storing Your Area Code; Telephone Operation - Radio Shack 900 MHz Owner's Manual

43-749.fm Page 14 Tuesday, September 5, 2000 11:24 AM
TURNING CALLER ID/CALL
WAITING ON OR OFF
If you have Call Waiting and Caller ID ser-
vice, you can set the answering system to
show Caller ID information for an incoming
call even while you are on the phone.
Follow these steps to turn the Caller ID/Call
Waiting feature on or off.
1. Lift the handset and press
The Caller ID setup menu appears on
the display with Auto Talk
2. Press or
2 VOL/CID
(Caller ID/Call Waiting).
3. Press to change the Caller
CH/SELECT
ID/Call Waiting setting.
appears indicating the selected setting.
4. Press then return the hand-
FUNCTION
set to the base to store the new setting.
STORING YOUR AREA
CODE
You can store your local area code in the an-
swering system's Caller ID record so it does
not store the area code if the received call is
from your local area. If you need to dial the
area code (or store it in memory), you can
ˆ

Telephone Operation

To make a call, lift the handset and press
. Talk and the current volume setting
TALK
(see "Adjusting the Handset Volume" on
Page 15) appear on the handset's display,
and the CHARGE/IN USE indicator on the
base lights. Then dial the number. The num-
ber displays on the handset as you dial, then
(after a few seconds) the call's elapsed time
displays.
14
.
FUNCTION
selected.
9 9 9 9
to select CIDCW
On or Off
Telephone Operation
add it afterwards. See "Adding/Deleting the
Area Code" on Page 21.
Note: If your calling area requires 10-digit di-
aling including area code, do not enter the
area code but leave this option blank.
Follow these steps to store your area code.
1. Lift the handset and press
The Caller ID setup menu appears on
the display with Auto Talk
2. Press (or
3 VOL/CID
Area Code .
3. Press , then enter your 3-
CH/SELECT
digit area code. If you make a mistake,
6 6 6 6
repeatedly press
the cursor over the incorrect digit, then
enter the correct number.
4. Press
CH/SELECT
code, then press
FUNCTION
handset to the base to clear the display.
Note: If an area code is already stored, it ap-
pears on the display when you press
. To delete the area code, press
TION
then hold down
SELECT
vious entry is erased, then enter your area
code.
Note: You can also dial the number before
you press . If you make a mistake, re-
TALK
peatedly press
DELETE
entry, then enter the correct number. You
can also hold down
DELETE
one second to delete the entire number.
.
FUNCTION
selected.
9 9 9 9
twice) to select
7 7 7 7
/ or / to move
#
to store the area
or return the
FUNC-
CH/
so the pre-
DELETE
to erase the wrong
for more than