Table of Contents
Advertisement
USING THE STIR TOWER
Align the pins on the stir tower shaft
with the slots on the flip-and-stir
3
wand. Press the wand up and rotate
counterclockwise to lock into place.
With the lid removed, align the back
of the Multi-Cooker with the front
of the Stir Tower. Make sure the
5
Stir Speed selector is set to 0 (OFF)
position before placing the Multi-
Cooker onto the easy connect power
port on the stir tower base.
Lower the stir arm until it locks
7
into place.
6 | USING THE STIR TOWER
Raise the stir arm by pressing down
4
on the release lever.
Place the cooking pot in the
6
Multi-Cooker, aligning the notch in
the cooking pot with the stir arm.
Advertisement
Table of Contents
