Tv Connector And Phone Calls; Switching Off Audio Transmission - Phonak TV Connector User Manual

You might accept the incoming
audio signal on the hearing aid
by pressing the hearing aid button.
For more detailed explanation refer
to the hearing aid user guide.
You will hear the sound of the TV/audio device directly
in your hearing aids.
Make sure the TV or alternative audio device is
switched on.
If no audio input is available, the TV Connector
automatically stops the audio transmission to the
hearing aids. The indicator light will glow red
(standby mode).
If the hearing aids are out of range of the TV Connector
the audio transmission will be terminated. Once the
hearing aids are back into the range of TV Connector,
the audio signal will automatically resume streaming.
16

4.1 TV Connector and phone calls

If the hearing aids are connected to your cell phone,
you can still receive phone calls, even when using the
TV Connector.
In case of an incoming call, the hearing aids automatically
stops the audio signal from the TV Connector and the
alerts will be played signalizing to the incoming call. After
the call the hearing aids automatically switch back to the
TV Connector audio signal.

4.2 Switching off audio transmission

To end the transmission of the audio signal, simply
switch off the TV or other connected audio source.
The TV Connector will go into the standby mode
automatically.
17