Optional: Connecting To An Audio Device Using A Headset Socket; Connecting The Tv Connector To The Hearing Aids - Phonak TV Connector User Manual

3.4 Optional: Connecting to an audio device using
the headset socket
If the TV or audio device does not support digital audio
OUTPUT (as shown in chapter 3.3) replace the supplied
optical (Toslink) cable on the TV Connector with the
"Analog 3.5mm jack" cable and insert the other end
into the headset output socket of your TV (or audio
device).
Some TVs will switch off their loudspeakers when
using the headset socket – the TV will not be
audible for other people.
12

3.5 Connecting the TV Connector to the hearing aids

When the TV Connector is plugged into a power
source the very first time upon installation, the
connection to the hearing aids will be initiated
automatically and the hearing aids will play a
confirmation tone.
To connect new hearing aids to the TV Connector follow
the steps:
J Press the Connect
button
on the back, and the indicator
light will start rapidly blinking
blue.
J Make sure the hearing aids are
switched on and within
1 meter (3 ft) of the
TV Connector.
13