Advertisement
Quick Links
Advertisement
Related Manuals for Phonak TVLink basestation
Summary of Contents for Phonak TVLink basestation
- Page 1 EU Representative: Phonak GmbH D-70736 Fellbach-Oeffingen Germany 0678...
- Page 2 1. Device description Phonak TVLink basestation The TVLink basestation is connected to your TV (or any other audio source) and wirelessly sends audio signals from your TV to an A2DP Headset within a range of up to 30 meters (100 ft).
- Page 3 2. Installing the Phonak TVLink Step 1: Connecting the TVLink basestation To connect the power supply (h): Place the TVLink basestation next to your TV. Connect the mini-USB plug of the power supply to the Power input (“Power”) of the TVLink basestation.
- Page 4 Use the RCA/Cinch cable (i) to connect the TVLink basestation to the TV: Connect the 3.5 mm stereo plug to the audio input (“Audio IN”) of the TVLink basestation. Connect the red and white RCA/Cinch plugs to the matching red and white RCA/Cinch output sockets on your TV.
- Page 5 2. Installing the Phonak TVLink You can also connect your TVLink basestation to the 3.5 mm headset socket of your TV, using the 3.5 mm audio cable (k): Connect the 3.5 mm stereo plug to the audio input of the TVLink basestation (“Audio IN”).
- Page 6 Cinch/RCA or SCART socket as described above. For further information on volume adjustment please refer to step 6 below. The Phonak TVLink basestation can also be connected to any other audio source such as an MP3 player, PC or...
- Page 7 2. Installing the Phonak TVLink Step 2: Switching on Switch on the TVLink basestation by a short press of the ON/OFF button (a) as shown in fig. 1. The status light (g) will illuminate green initially and may switch to blue later.
- Page 8 2. Installing the Phonak TVLink Step 3: Pairing the TVLink basestation and a headset Before starting to use the TVLink system, the TVLink basestation and the headset need to be paired. The pairing procedure controls which Bluetooth devices are permitted to communicate with each other.
- Page 9 2. Installing the Phonak TVLink Initiate the pairing process on your headset as stated in its manual. If the TVLink basestation status light (g) is not flashing blue already, press the ON/OFF button (a) for 5 seconds until the Bluetooth indicator (g) is fast flashing blue.
- Page 10 The TVLink system supports Bluetooth operation up to a range of 30 m (100 ft). Line-of-sight between your Headset and the TVLink basestation is not required. However, interference in the environment by walls or furniture may reduce the operating range.
- Page 11 It may take up to 10 seconds until the streaming resumes. The streaming light indicator (g) should be solid blue during streaming. If the TVLink basestation status light (g) – is green, make sure TV sound and Headset are switched on.
- Page 12 First, set the volume of the TV speakers at the level to suit other viewers. If the TVLink basestation is connected to your TV with the RCA/Cinch cable (i), adjust the volume via the TVLink basestation volume control (b) and (c).
- Page 13 3. Daily usage of the Phonak TVLink If your TVLink basestation is connected to the headphone socket of your TV, you may also use your TV remote control to adjust volume via the TV directly. Please refer to the TV user guide for more details on setting the TV volume.
- Page 14 3. Daily usage of the Phonak TVLink Step 6: Switching off TVLink basestation To switch off the devices: To end the transmission of the TV audio signal, switch off the TVLink basestation by pressing the ON/OFF button (a) as shown in fig. 2. Fig. 2...
-
Page 15: Declaration Of Conformity
4. Declaration of conformity Hereby Phonak AG declares that this Phonak TVLink basestation meets the requirements of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC. The full text of the Declaration of Conformity can be obtained from the addresses below. - Page 16 Changes or modifications made to this device not expressly approved by Phonak may void the FCC authorization to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC and ICES-003 rules.
-
Page 17: Information And Explanation Of Symbols
5. Information and explanation of symbols The CE symbol is confirmation by Phonak AG that this Phonak product 0678 meets the requirements of the R&TTE Directive 1999/5/EC on Radio and Telecommunication Terminal Equip- ment. The numbers after the CE symbol are the numbers of consulted certified... -
Page 18: Operating Conditions
5. Information and explanation of symbols This symbol indicates that it is important for the user to read and take into account the relevant information in these user guides. This symbol indicates that it is import- ant for the user to pay attention to the relevant warning notices in these user guides. - Page 19 5. Information and explanation of symbols Transport During transport or storage, the and storage temperature should not exceed the conditions limit values of –20°/60° Celsius and relative humidity of 90% for a long period of time. The air pressure between 500 and 1100 hPa is appropriate.