Daily Use Of The Phonak Tv Connector - Phonak TV Connector User Manual

J You will hear a confirmation
beep in your hearing aids when
the connection was successful.
This may take up to 10 seconds.
The TV Connector will connect to any compatible
hearing aid, which is within the range during the
connection process. They will be automatically
connected again after the initial connection
process.
14
4. Daily use of the TV Connector
The TV Connector can only receive and transmit
audio in mono or stereo. Please make sure that no
Dolby digital or DTS audio settings are used by the
TV (or audio device).
If present, these audio signals will be indicated by
a red LED indicator light on the TV Connector.
Please change the audio signal to stereo (PCM) in
the audio settings menu of the TV.
Switch ON your TV (or alternative audio device). The TV
Connector will automatically transmit the audio signal
to the connected hearing aids.
15