) ....................24 eplaCeMent onthly 4.3 t ....................24 Roubleshooting 5.0 Parts Diagrams and Specifications 5.1 h ..................25 andle sseMbly aRts iagRaM kaivac 5.2 t ................. 25 Rolley uCket sseMbly aRts iagRaM 5.3 v ................26 aCuuM sseMbly aRts iagRaM 5.4 v...
• After the first 50 hours of use of an OmniFlex battery, Kaivac will use the following equation to determine the prorated purchase price of a replacement battery box:...
Stay alert - watch what you are doing. • Keep operating area clear of all persons. • The Kaivac shall be disconnected from mains during cleaning or maintenance and when replacing parts or converting the machine to another function. • Turn off all controls before unplugging.
Page 9
SPRAY SYSTEM WARNINGS (ONLY): • Do not spray liquid from the Kaivac onto electrical outlets or any electrical devices. • Risk of injection or injury to persons - do not direct discharge stream at persons. • INJECTION HAZARD: Equipment can cause serious injury if the spray permeates the skin. do not point the gun at anyone or any part of the body.
DO NOT charge batteries outdoors. • DO NOT attempt to repair, service or modify the batteries or charger. Contact Kaivac Technical Support with any issues. • DO NOT short-circuit the battery or charger terminals with conductive items such as paper clips. This can deliver high current, resulting in hear and fire.
DO NOT use without Vacuum Motor Float Cage in place. SPRAY SYSTEM WARNINGS (ONLY): • Do not spray liquid from the Kaivac onto electrical outlets or any electrical devices. • Risk of injection or injury to persons - do not direct discharge stream at persons.
Fully Discharge vs. Partial Discharge and the Effect on Battery Cycles: Unlike lead acid batteries typically used in auto scrubber, the Kaivac Battery is not damaged by fully discharging. The BMS (Battery Management System) has a cutoff voltage of 30V which protects the Battery from experi- encing full discharge.
2.1 a ttaChing andle to Rolley uCket Handles: There are multiple options available based on your needs. Contact Kaivac Customer Service for more details at 1-800-287-1136. OFUHA - 4 Bend Handle Standard Offerings: -AutoVac -AutoVac Battery KMFUH2A - 2 Bend Handle...
OVT01 - Vacuum Tank - 2 Stobs There are multiple options Standard Offerings: available based on purchased package. Contact -Wet Vacuum Kaivac Customer Service for more details at -Dispense-and-Vac -Spray-and-Vac 1-800-287-1136. OVTAS - Vacuum Tank - 4 Stobs (no casters)
Spigot Controls: There are multiple options available PCSHA- Steel Spigot Handle based on purchased package. Contact Kaivac Customer Standard Offering: Service for more details at 1-800-287-1136. -UniVac OTTCA- Thumb Throttle KMFSH - Plastic Spigot Handle and Extension Rod...
2.0 Assembly 2.4 b atteRy sseMbly Battery/Pump Box: There are multiple options available based on purchased package. Contact Kaivac Customer Service for more details at 1-800-287-1136. *OBATT - Battery Box **OSU50 - Pump Box Standard Offerings: Standard Offerings: -Dispense-and-Vac -Spray-and-Vac...
There are multiple assemblies Additional parts may be required to upgrade to AutoVac from other offerings. Contact Kaivac Customer Service for more details at 1-800-287-1136. (AVVA, AVSAL, AVVH2A and OTTCA) that get mounted to an AutoVac trolley to have a fully assembled AutoVac unit...
CAUTION: Before filling with solution, ensure the spigot is in the “OFF” position. cleaning Fill the tank with Kaivac or Kaivac approved Chemicals. Follow the proper dilution instructions on bottles or dispenser. For accuracy and conve- nience, use Kaivac proportioned chemical packets. Do not add chemical systems to Trolley-Bucket if using Pump Box set-up.
Low Pressure setting only. Chemicals must be cleared from the Spray Line prior to High Pressure rinsing. To do this, turn OFF the Chemical Valve, then spray in Low Pressure settings for 15 seconds. kaivac Pinpoint Spray Pressure High...
TIP: With Dispense-and-Vac, you can extend your cleaning range with the following procedure: 1. Thoroughly clean Vacuum Tank. 2. Fill Vacuum Tank and Trolley-Bucket with diluted cleaning kaivac solution. 3. Dispense solution onto floor. 4. When Trolley-Bucket is out of solution, use �ump �ose to refill cleaning Trolley from Vacuum Tank.
2. Cleaning Chemicals may be producing too much foam. Use correct Chemicals. 3. Battery may need recharged or replaced. • Other Issues? Contact Technical Support Phone: United States and Canada: 1-800-287-1136 kaivac International: 1-513-887-4600 email: info@kaivac.com cleaning For Technical Support Contact Form go to: https://www.kaivac.com/contactus.php...
15 FT 240V EXTENSION CORD UK EXT15AUS 15 FT 240V EXTENSION CORD AUSTRALIA 5.4 v aCuuM sseMbly aRts iagRaM kaivac [P/N: OVTABLK, OVT01, OVT02, OVTAU, OVTAS] PART NO. PART DESCRIPTION CSS209 8-32 X 3/4 ROUND HEAD MACHINE SCREW OVTTBLK OMNIFLEX VAC TANK TOP BLACK...
PLASTIC VAC CORD PLOW SUBSSSA SNAP STRAP FOR SPREADER CSS191 #12-24 X 5/8 SCREW FOR ARM 5.8 500 psi p sseMbly aRts iagRaM kaivac [P/N: PA2170-2 OR PAO240V-2] PART NO. PART DESCRIPTION WLOMNI WATER LINE & CLAMP cleaning CONNECTOR JUMPER WIRE CSS206...
Page 30
(2) 5” (12,7 cm) Casters: (2) 3” (7,62 cm) Handle: Metal with Posts (removable) Parking Brake: Training Materials: Tote Bag: 10 Inch Squeegee Head: No (optional) kaivac cleaning systems Customer/Technical Support P a g e ǀ P a g e ǀ 1-800-287-1136...
Need help?
Do you have a question about the OmniFlex TROLLEY BUCKET and is the answer not in the manual?
Questions and answers