Please return completed forms to: arising in connection with the use or inability to use Kaivac’s product. This warranty is in lieu of any other Kaivac, Inc.
- watch what you are doing. • Keep operating area clear of all persons. • The Kaivac shall be disconnected from mains during cleaning or maintenance and when replacing parts or converting FOr iNDOOr USe ONly the machine to another function. •...
• do not attempt to repair, service or modify the batteries or charger. contact kaivac technical support with any issues. nents rated less than 500 psi (3447 kpa) working pressure (including but not limited to spray guns, hose, and hose connec- •...
81 minutes of run time. OFUhA - 4 bend Handle Fully Discharge vs. Partial Discharge and the effect on Battery Cycles: unlike lead acid batteries typically used in auto scrubber, the kaivac Standard Offerings: battery is not damaged by fully discharging. the bms (battery management system) has a cutoff voltage of 30V which protects the battery from -autoVac experiencing full discharge.
Standard Offerings: based on purchased package. contact kaivac customer PCShA - Steel Spigot Handle -wet Vacuum kaivac customer service for more details at service for more details at 1-800-287-1136.
1-800-287-1136. available based on purchased package. contact kaivac (aVVa, aVsal, aVVH2a and ottca) that get mounted to customer service for more details at 1-800-287-1136.
500 psi omniFlex pump system with the wet Vacuum and the trolley-bucket for extreme soil removal. it empowers workers to clean hygienically without touching well and as fast as a walk-behind or ride-on auto scrubber at a fraction of the cost.
1. thoroughly clean Vacuum tank. 2. Fill Vacuum tank and trolley-bucket with diluted cleaning solution. 3. dispense solution onto floor. 4. when trolley-bucket is out of solution, use �ump �ose to refill trolley from Vacuum tank. dumping from sweep debris. Vacuum if necessary.
Page 14
5.0 Parts Diagrams and Specifications 5.2 P Roduct Pecifications ontinued Vacuum Tank Specifications Vacuum Tank 10 Gallons (37,85 l) Vacuum Tank Material Injection Mold Polypropylene Vacuum Tank Clean-out 100% (easy flush) Vacuum Tank Casters None Method of Dumping Drain Hose Dump Hose 26”...
Page 15
08/2018 KAIVAC EMEA GMBH Sommerfeld 1 5202 Neumarkt a. Wallersee Austria T +43 (0)6216 4524 15 office@kaivac-emea.com www.kaivac-emea.com Member of M&F Group of Companies.
Need help?
Do you have a question about the Trolley-Bucket and is the answer not in the manual?
Questions and answers