Table of Contents
Advertisement
3.2 d
-
ispense
Cleaning with OmniFlex Dispense-and-Vac mode is better, safer and faster than cleaning with a mop. You
apply fresh cleaning solution to the floor, spread and lightly brush into grout lines, then vacuum away all
soils and liquids.
After the unit has been filled with the appropriate
amount of water/solution, turn the Spigot handle
counter clockwise to MAX position. Beginning at the
rear of the area, begin dispensing solution, moving to-
wards the front of the area.
Beginning at the rear of the area, begin dispensing solu-
tion, moving towards the front of the area. Park unit so
that it blocks entry to area.
Front
Front
of
of
End
area
area
Turn Vacuum Motor to ON. Attach Vacuum Wand to
Vacuum Hose (if not already connected).
Vacuum floor surface diagonally to grout lines, reaching
under shelves, seating etc.
P a g e ǀ
1 9
-v
o
and
aC
peRation
Start
Back
Back
of
of
area
area
cleaning
systems
Turn Spigot clockwise to the OFF position. Use
Spreader Tool in back-and-forth motion to cover
floor with cleaning solution. *
troubled or extra soiled areas to get a deeper clean
Slap & Tap:
running. Slap Vacuum Wand on floor 3-4 times to dislodge
debris from squeegee head. Then, invert Wand and Tap 4-5
times to dislodge any fluids or substance from Wand.
kaivac
©2017 Kaivac, Inc. All Rights Reserved
3.0 Operation
Agitate Spreader Tool over
*
Once Vacuuming is complete, keep motor
TM
Then Turn OFF Motor.
www.kaivac.com
Hide quick links:
Advertisement
Table of Contents
