Troubleshooting - Magnavox MBP6700P Owner's Manual

11. TROUBLESHOOTING

Problem
No power.
No sound or picture.
4K or 4K HDR signal does not output.
No reaction to the remote control.
No Audio / Video signal on the display
device via HDMI cable.
No high-definition video signal on the TV
screen.
Distorted picture.
Completely distorted picture or black /
white picture with Blu-ray Disc™ / DVD.
No sound or distorted sound.
Picture freezes momentarily during disc
playback.
EN
Check the AC power cord, if it is properly connected.
Try another power outlet.
Unplug the AC power cord, and wait for about 5-10 seconds. Plug it back in and at-
tempt to power on the unit.
Make sure both the TV and Blu-ray Disc™ player are turned on.
Confirm the connections to the TV are made properly as shown in the "CONNECTIONS"
on page 11.
Check to see whether the connected TV or another device supports HDCP. (This unit
will not output a video signal unless the other device supports HDCP.)
Confirm that the unit is connected to a 4K or 4K HDR-compatible TV.
Confirm that the HDMI cable from the unit is connected to an HDR-compatible HDMI
port on the TV.
Confirm that the 4K or 4K HDR settings on the TV are enabled.
Confirm the "HDMI video" settings on this unit:
– 4K output is not possible when "HDMI video" on this unit is set to "480p", "720p",
"1080i", or "1080p".
– 4K HDR output is not possible when "HDMI video" on this unit is set to other than
"Auto" or "4K", or when "High Dynamic Range output" is set to "SDR".
Refer to the table on page 14 for details.
If the unit is connected via a cable box, set-top box, etc., that device might be blocking
the 4K or 4K HDR signal. Connect the unit directly to a 4K or 4K HDR-compatible TV.
Reduce the distance to infrared sensor window.
Confirm that the player's AC power cord is plugged into a power outlet.
Check the batteries in the remote control and make sure they are inserted properly by
+ or - symbols.
Please check IR signal. Refer to on "IR signal check" on page 54.
If the unit is connected to a non-certified HDMI device, the audio / video signal will not
output to that device.
Make sure the display device is on the correct input / video source.
Perform an HDMI hotplug: Disconnecting the HDMI cable from the display device, turn
on both devices, and replug the HDMI cable back in.
Check with the TV manufacturer, if there are any software updates available for the TV.
Check to see if the HDMI cable is a certified version.
Does the disc contain high-definition video? High-definition video is only available
when the disc contains it.
Does the TV support high-definition video? High-definition video is only available when
the TV supports it.
Sometimes a small amount of picture distortion may appear. This is not a malfunc-
tion.
Make sure the disc is compatible with this unit.
Adjust the volume.
Check to see if the speakers are connected correctly.
Check the HDMI connection.
Make sure the HDMI cable is not plugged into an HDMI-DVI adapter or projector which
does not handle digital sound.
Check the settings in the "Audio" menu.
Check the disc for fingerprints / scratches and clean with a soft cloth wiping from the
center to the outer edge.
49
Tip
continued on next page