Device Operating Conditions - Smeg GW0160 Technical Manual

THRESHOLD - WATER QUANTITY – TURBINE FLOW REGULATOR PULSE CORRESPONDENCE
Threshold setting
S0 – washing pump activation
S1 - prefilling
S2 - fill completion
S3 - tank safety device
For versions prior to 5.0 fw apply the following correlations
THRESHOLD - WATER QUANTITY – TURBINE FLOW REGULATOR PULSE CORRESPONDENCE
Threshold setting
S0 – washing pump activation
S1 - prefilling
S2 - fill completion
S3 - tank safety device
6.2

DEVICE OPERATING CONDITIONS

For the sake of clarity, 3 general device operating conditions are defined.
The alarms which may be present depend on the device's operating condition.
The device's response if an alarm occurs also depends on the current operating condition.
CYCLE IN PROGRESS: washing cycle running
GW/WD2145
Turbine flow regulator pulses
300
800
200
1800
GW/WD2145
Turbine flow regulator pulses
300
800
200
2000
OPERATING CONDITIONS
Descriptions used to identify the device's operating status
STANDBY: device on, not in "OFF" status,
with no cycle running.
Water q.ty Turbine flow regulator pulses
1,5 litres
4 litres
1 litre
9 litres
Water q.ty Turbine flow regulator pulses
1,5 litres
4 litres
1 litre
10 litres
OFF: the PCB is powered up but in "OFF"
status (the "ON/OFF" button has been
pressed). In this condition, only a small
number of critical inputs are monitored.
"OFF" appears on the segment display.
7
OTHERS
Water q.ty
900 4.5 litres
1200 6 litres
600 3 litres
3000 15 litres
OTHERS
Water q.ty
900 4.5 litres
1200 6 litres
600 3 litres
3000 15 litres