Tracelog File - Smeg GW0160 Technical Manual

7.2

TraceLog File

The file downloaded using TraceLog contains the essential parameters, using "True" and "False" respectively to indicate whether or
not the relevant parameter is present, instead of "0" or "1"
SERIAL CODE:
[CSER]:3333333333
VERSIONS:
[0010]BootVer: (5.2.0.2)
[0011]BootDate: (29/8/2012)
[0012]MainVer: (4.18.0.36)
[0013]MainDate: (21/11/2014)
SERVICE PARAMETERS:
[0501]Cold Water: (True)
[0503]Demi Water: (True)
[0540]FP P1: (True)
[0541]FP P2: (False)
[0542]FP P3: (False)
[050E]SLP1: (True)
[050F]SLP2: (True)
[0510]SLP3: (False)
[0538]Drying Motor: (False)
[0539]Acqua Stop: (False)
[053E]Auto Door: (False)
[053A]Absolute Filter: (False)
[0507]Sump Rinse: (False)
[0513]Offset TL (°C/10): (0)
[0514]Offset TCL (°C/10): (0)
[0515]Offset TA (°C/10): (0)
[0545]Delivery Pump 1 (ml/min): (46)
[0549]Delivery Pump 2 (ml/min): (46)
[0536]Delivery Pump 3 (ml/min): (46)
[050A]Temperature Mixed Drain (°C): (0)
[0508]Ss extra water load: (0)
[0509]Quantity of treated Water (lt): (25)
[0546]Three-Phase Power Supply: (True)
[055A]Frequency: (Autodetect)
[0504]N° Repetitions: (3)
[053D]Cyclic Program: (True)
[0558]Powder detergent box enabled: (True)
[0601]Last Rinse: (False)
[0602]Block Dosage: (False)
N.B.:
Remember that during download, the parameters and thus the customisations set in the device will be shown.
19