Rola 4 Place Bike Carrier - Folding Assembly And Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Rola Manuals
  4. Automobile Accessories
  5. 4 Place Bike Carrier - Folding
  6. Assembly and installation instructions manual

Rola 4 Place Bike Carrier - Folding Assembly And Installation Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Please read all instructions carefully before assembly, installation and/or use of this product.
ASSEMBLY INSTRUCTIONS
1.
Use key to unlock lock on Collar Bracket.
2.
Pull spring loaded release pin on side of Main Support tube, remove handle mechanism, and rotate bike
Support Arms into the UP position. Re-insert the handle mechanism. Pull out the spring loaded release
pin and push handle all the way down. Let the spring loaded pin go so that it fully engages the handle
mechanism.
3.
Slide the Collar Bracket onto the bike carrier Main Support tube in orientation shown (see Diagram 1).
4.
Attach Collar Bracket to Main Support tube using one (1) ½" x 3-1/4" lg. hex bolt, two (2) nylon flat
washers, and locknut installed through the "slotted" hole in Collar Bracket. Tighten locknut until it is snug
against the flat washers.
5.
Attach Receiver piece to Collar Bracket using two (2) ½" x 3" hex bolts through the
½" diameter holes (closest to end of tube). (See Diagram 2)
Tighten Receiver piece bolts to 75 Lb.-Ft.
7.
Lock Collar Bracket to Main Support tube so bike carrier is in the upright position.
Diagram 1
1/2" x 3-1/4" Hex Bolt
Nylon Washer
Diagram 2
Cequent Towing Products - Plymouth, MI
Technical Service: (888) 521-0510
Product Name:
Product Code:
Handle Mechanism
1/2" x 3-1/4" Hex Bolt
Release
Pin
½" Locknut
4 Place Bike Carrier - Folding
59401
½" Locknut
Diagram 3
www.rolaproducts.com
59401N Rev E
2" Shank
11-23-09
PRINTED IN CHINA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4 Place Bike Carrier - Folding and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rola 4 Place Bike Carrier - Folding

Summary of Contents for Rola 4 Place Bike Carrier - Folding

  • Page 1 4 Place Bike Carrier - Folding Product Name: Product Code: 59401 Please read all instructions carefully before assembly, installation and/or use of this product. ASSEMBLY INSTRUCTIONS Use key to unlock lock on Collar Bracket. Pull spring loaded release pin on side of Main Support tube, remove handle mechanism, and rotate bike Support Arms into the UP position.

  • Page 2: Loading Instructions

    4Place Bike Carrier - Folding Product Name: Product Code: 59401 Please read all instructions carefully before assembly, installation and/or use of this product. LOADING INSTRUCTIONS: Place the bike rack receiver into your receiver hitch. Fit rack as close to vehicle as possible. For 2”...

  • Page 3: Important Notes

    (as a result of colliding with or trying to avoid fallen bicycles and/or the rack). • ROLA™ racks are powder coated to help prevent rust. As with any metal equipment it is recommended that you keep the rack clean and remove road salt and debris.

  • Page 4: Instructions De Montage

    Porte-vélos à 4 places - Pliable Product Name: Product Code: 59401 Il importe de lire attentivement toutes les instructions avant l’assemblage, l’installation et/ou l’utilisation de ce produit INSTRUCTIONS DE MONTAGE Utiliser la clé pour déverrouiller le collet. Tirer sur la goupille de déverrouillage à ressort située sur le côté du tube-support principal, retirer le mécanisme de la poignée et tourner les bras du support à...
  • Page 5 Porte-vélos à 4 places - Pliable Product Name: Product Code: 59401 Il importe de lire attentivement toutes les instructions avant l’assemblage, l’installation et/ou l’utilisation de ce produit INSTRUCTIONS DE CHARGEMENT : Placer le récepteur du support à vélos dans le récepteur de l’attelage. Positionner le support aussi près du véhicule que possible.

  • Page 6: Remarques Importantes

    Porte-vélos à 4 places - Pliable Product Name: Product Code: 59401 Il importe de lire attentivement toutes les instructions avant l’assemblage, l’installation et/ou l’utilisation de ce produit REMARQUES IMPORTANTES : • Ce support à vélos a été conçu pour transporter quatre (4) vélos, en autant que le poids maximum sur le support ne dépasse pas 45 kg (100 lb).
  • Page 7 Cargador para 4 bicicletas - Plegable Product Name: Product Code: 59401 INSTRUCTIONS DE MONTAGE Use la llave para abrir el bloqueo de soporte del collar. Hale el pasador de liberación con resorte en el costado del tubo de apoyo principal, retire el mecanismo de la manija y rote los brazos de apoyo de la bicicleta hacia la posición vertical.

  • Page 8: Instrucciones De Carga

    Cargador para 4 bicicletas - Plegable Product Name: Product Code: 59401 Lea todas las instrucciones atentamente antes de armar, instalar y/o usar este producto. INSTRUCCIONES DE CARGA: Coloque el receptor del portabicicletas en el enganche receptor. Ajuste el portabicicletas lo más cercano al vehículo como sea posible.

  • Page 9: Notas Importantes

    (ya sea que colisione o al tratar de evitar las bicicletas y/o la bandeja caídas). • Las bandejas ROLA™ están cubiertas con polvo para evitar la oxidación. Al igual que con cualquier equipo de metal, se recomienda que conserve la bandeja limpia y retire las sales y suciedades recogidas en la carretera.

This manual is also suitable for:

59401

Table of Contents