Related Manuals for Nilfisk-Advance 908 4704 010
Summary of Contents for Nilfisk-Advance 908 4704 010
- Page 1 FLOORTEC 350 Instructions for use Bedienungshandbuch Instructions d’utilisation Instructions for use Gebruiksaanwijzing Deutsch 08/2006 Revised 11/2008 Français English 146 3083 000 Nederlands Model: 908 4704 010...
- Page 2 Konformitätserklärung Potvrda sukladnosti Dichiarazione di conformità Declaración de conformidad Atitikties deklaracija Déclaration de conformité Yhdenmukaisuustodistus Conformiteitsverklaring Declaração de conformidade The undersigned certify that the above A presente assinatura serve para declarar mentioned model is produced in accordance with the following directives são produtos em conformidade com as Der Unterzeichner bestätigt hiermit dass die oben erwähnten Modelle gemäß...
-
Page 3: Table Of Contents
USER MANUAL ENGLISH TABLE OF CONTENTS INTRODUCTION ................................2 MANUAL PURPOSE AND CONTENTS ............................2 TARGET ......................................2 HOW TO KEEP THIS MANUAL ............................... 2 DECLARATION OF CONFORMITY ..............................2 IDENTIFICATION DATA ................................... 2 OTHER REFERENCE MANUALS ..............................3 SPARE PARTS AND MAINTENANCE ............................. 3 CHANGES AND IMPROVEMENTS .............................. -
Page 4: Introduction
ENGLISH USER MANUAL INTRODUCTION NOTE The numbers in brackets refer to the components shown in Machine Description chapter. MANUAL PURPOSE AND CONTENTS The purpose of this Manual is to provide the operator with all necessary information to use the machine properly in a safe and autonomous way. -
Page 5: Other Reference Manuals
USER MANUAL ENGLISH OTHER REFERENCE MANUALS – Spare Parts List (supplied with the machine) – SPARE PARTS AND MAINTENANCE Centers. Only original spare parts and accessories must be used. CHANGES AND IMPROVEMENTS OPERATION CAPABILITIES CONVENTIONS Forward, backward, front, rear, left or right are intended with reference to the operator’s position, that is to say with the hands on the handlebar (6). -
Page 6: Safety
ENGLISH USER MANUAL SAFETY The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary precautions to safeguard people and property. The operator’s cooperation is essential in order to prevent injury. No accident prevention program is effective without the total cooperation of the person responsible for the machine operation. - Page 7 USER MANUAL ENGLISH WARNING! – Before using the battery charger, ensure that frequency and voltage values, shown on the machine serial number plate, match the electrical mains voltage. – Do not pull or carry the machine by the battery charger cable and never use the battery charger cable as a handle.
-
Page 8: Machine Description
ENGLISH USER MANUAL MACHINE DESCRIPTION MACHINE STRUCTURE AND CONTROLS Main switch: 29. Vacuum system motor lamellar fuse (7.5 A) • when turned to “I” the vacuum system and main broom 30. Hood 31. Hopper upper handle • when turned to “II” the vacuum system, main broom 32. -
Page 9: Accessories/Options
USER MANUAL ENGLISH ACCESSORIES/OPTIONS In addition to the standard components, the machine can be equipped with the following accessories/options, according to the Brooms of different materials 80 Ah battery Non-marking skirts NOTE For further information concerning the optional accessories, contact an authorised Retailer. TECHNICAL DATA General Values... -
Page 10: Wiring Diagram
ENGLISH USER MANUAL WIRING DIAGRAM Colour code Batteries Black Battery charger Blue Electronic board LED Brown Relay Green Main fuse Grey Vacuum fan fuse Orange Side broom fuse Pink Main motor Vacuum system motor Violet Side broom motor White Main switch Yellow Hopper microswitch S311349... -
Page 11: Use
USER MANUAL ENGLISH S311348AB WARNING! – DANGER – WARNING – CAUTION – NOTE While reading this Manual, the operator must pay careful attention to the symbols shown on the plates. Do not cover these plates for any reason and immediately replace them if they are damaged. BATTERY CHECK ON A NEW MACHINE The machine is supplied with a standard 12 V, 45 Ah GEL battery (which does not require maintenance). -
Page 12: Machine Operation
ENGLISH USER MANUAL MACHINE OPERATION Avoid stopping for a long time with the machine in the same position and the brooms turning: this could create unwanted • Stop the machine and turn the main switch (1) to “0”. • • Turn the main switch (1) to “I”... -
Page 13: Maintenance
USER MANUAL ENGLISH MAINTENANCE The lifespan of the machine and its maximum operating safety are ensured by proper and regular maintenance. The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions, WARNING! To perform maintenance procedures, the machine must be off and, if necessary, the batteries must be disconnected. -
Page 14: Side Broom Height Check And Adjustment
ENGLISH USER MANUAL SIDE BROOM HEIGHT CHECK AND ADJUSTMENT below: • Drive the machine on a level ground and lower the side broom. • Keep the machine stationary and turn on the side broom for a few seconds. • Turn off the side broom by pressing the switch (1), then lift it and move the machine. -
Page 15: Main Broom Height Check And Adjustment
USER MANUAL ENGLISH MAIN BROOM HEIGHT CHECK AND ADJUSTMENT below: • • Keep the machine stationary and turn on the main broom for a few seconds. • Turn off the main broom by pressing the switch (1), then move the machine. •... -
Page 16: Main Broom Disassembly/Assembly
ENGLISH USER MANUAL MAIN BROOM DISASSEMBLY/ASSEMBLY CAUTION! It is advisable to wear protective gloves when replacing the main broom because there can be sharp debris between the bristles. Turn the main switch (1) to “0”. Remove the hopper (9). Loosen the handwheels (A, Fig. 5) completely on the left side of the machine. -
Page 17: Dust Filter Cleaning And Integrity Check, Hopper Gasket Check
USER MANUAL ENGLISH DUST FILTER CLEANING AND INTEGRITY CHECK, HOPPER GASKET CHECK Turn the main switch (1) to “0”. Remove the hopper (9). Loosen the knobs (A, Fig. 8). by the arrow (A, Fig. 9) to disengage it from the pins (B), combs (C). -
Page 18: Skirt Height And Operation Check
ENGLISH USER MANUAL SKIRT HEIGHT AND OPERATION CHECK checking the skirt height. Turn the main switch (1) to “0”. Check that the distance from the ground of the side skirts (A and B, Fig. 11) is 0 - 2 mm. Check the skirts for integrity, cuts or tears, which can reduce the machine vacuum capabilities. -
Page 19: Troubleshooting
USER MANUAL ENGLISH TROUBLESHOOTING Trouble Possible cause Remedy There is an open in the fuse (21) Reset the fuse by pressing the relevant button The machine does not start when turning the The battery charger cable is connected to the Disconnect it and place it in the housing main switch to “I”... -
Page 20: Scrapping
ENGLISH USER MANUAL SCRAPPING Before scrapping the machine, remove and separate the following materials, which must be disposed of properly according to the Law in force: – Battery – Brooms – Plastic hoses and components – Electrical and electronic components (*) FLOORTEC 350 146 3083 000(2)2008-11 A...
Need help?
Do you have a question about the 908 4704 010 and is the answer not in the manual?
Questions and answers